Open
Close

How to braid a fishtail braid, step by step instructions. Weaving options with photos. Reverse braiding pattern Fishtail braid braided from the side

Many fashionistas know how to weave a fishtail. A beautiful hairstyle is popular among many young girls because of its originality and festivity. It is stylish, does not damage the hair and holds its shape well, has many design options, and is suitable for any occasion: for every day and for a special event. Even if such a braid gets a little disheveled, a little carelessness will not harm it.

Who is suitable for “Spikelet” or “Fishtail” weaving based on face shape, color and hair type

The fishtail or spikelet hairstyle suits almost everyone. The only condition for its creation is that the hair length is sufficient for braiding. But even girls with short hair can use extensions.

Like any braid, Fishtails are best woven on straight hair of the same length.. However, it can also be done by those with curly hair, after straightening them with an iron. If you leave your hair wavy, the braid will look more airy and careless.

With a stepped haircut, the effect of negligence is also possible due to the fact that due to the unequal length of the strands, some of the hairs will be knocked out of the braid. If you want to avoid this, you can fix your hair with hairspray. Or you can braid the braid at the back of your head, leaving the side strands free.

This hairstyle looks very beautiful on highlighted hair, in this case the effect of light highlights is created.

Stylists give advice on how you can visually correct your face shape using different hairstyles:

  • a round face will be visually elongated by braids braided on both sides;
  • a rectangular face will be softened by a side braid, especially if you release individual thin strands from it;
  • the same loose strands are suitable for those with a triangular face, while it is better to start braiding the braid not from the top of the head, but from the back of the head;
  • a massive chin will be balanced by a high hairstyle and a braid placed around the head;
  • If you have a long and narrow face, you need to comb your hair before styling, and after finishing braiding, add volume to your hair by pulling strands out of the braid.

Essential Tools for Fishtail Hairstyles

To create a fish tail, you don't need any complicated equipment. A comb and an elastic band are enough to secure the finished hairstyle. Before braiding a fishtail, curly hair is straightened with an iron and additionally fixed with hairspray or spray. When you do your own hairstyle, at first you may also need a mirror, preferably a three-leaf one, or two, one opposite the other, so that you can see the hairstyle from the sides and the back of the head.

In the future, as the skill develops, the movements will become automatic. Even if the hairstyle doesn’t come out as neat as you wanted, a little carelessness won’t ruin it. To make the hairstyle look more elegant, use hairpins, additional elastic bands and other hair accessories. When creating complex hairstyles based on a fishtail, you will need hairpins.

Step-by-step diagram: how to weave a classic fishtail

There are two main techniques for braiding a fishtail braid - with a pick-up and without a pick-up. The first usually starts from the top of the head, the second closer to the back of the head. Braiding with a tie-in is a little more difficult, but with it the hairstyle holds tighter.


General rules for creating such a hairstyle:

  1. Before braiding a fishtail, you need to comb your hair thoroughly.
  2. When braiding, the strands are pressed to the head, sometimes slightly pulled down.
  3. The strands must be of the same thickness.
  4. The thinner the strands, the stronger the braid will hold.

How to weave a fishtailwith pick-up:

  1. On the parietal part of the head, three strands are separated and crossed with each other once, as when weaving a regular braid.
  2. This way you will get two strands: the top and bottom of the three form one part of the future braid, and the strand passed between them forms the second.
  3. From the outer part of the strand that is at the bottom, a thin strand is separated, to which part of the free hair is added from the same side. The formed common strand is thrown from above to the other side and connected to the opposite strand of hair. At the same time, she is taken inside and down.
  4. Now, from the opposite side, two narrow strands are also separated - one from the already formed one, and the second from free hair - and similarly cross it with the existing strands.
  5. When all the loose hair is pulled into the braid, you can fix the hairstyle or continue braiding. To do this, thin strands are separated from the outer edge of the braid and alternately thrown to the opposite side.


Weaving a spikelet without picking up:

  1. The hair is divided into two equal parts. If neat styling is required, you need to make a clear parting. For a more casual option, just push the strands in half with your hands.
  2. After this, a thin strand is taken from the upper outer edge at the level of the temple, which must be passed over the separated half and placed under the other.
  3. Then the strand is braided in the same way on the opposite side.
  4. In this way, the strands are sequentially intertwined to the desired length, after which the end of the braid is secured with an elastic band.


Fishtail ponytail braiding pattern

A fishtail can be braided not only on loose hair, but also by first collecting the hair in a ponytail.


This option has a number of advantages:

  • if you need a smooth styling on the crown, this is easier to achieve;
  • This type of braid is easier to braid, especially on long and thick hair;
  • this method reduces the length of the braid, which is important in cases where it is necessary to open the neck and shoulders.


Weaving a spikelet from a ponytail is similar to the process of classic weaving without a pick-up:

  1. hair is divided into two parts;
  2. from the outside, thin strands are separated one by one and successively thrown to the opposite side;
  3. The tip of the braid is secured with an elastic band.

Options for fishtail braids with loose hair, photo instructions

If you don’t want to completely pull your hair into your hair, you can braid a fishtail on half-down hair. In this case, only part of the hair is taken into the braid - either strands from the sides to open the face, or from the top of the head.

In the first option, the braid will serve as a kind of headband, under which loose hair will be hidden. This hairstyle will allow you to maintain the ease of your loose hair and at the same time prevent it from becoming disheveled.

In the second case, the braid will lie on top and only the hair in the temple area will be fixed. In the second case, for ease of styling, the hair can also be pre-gathered into a ponytail and secured with an elastic band.

If the braid is woven from two strands taken from the temples, then each of them is first twisted into a loose strand. Both strands are connected at the back of the head into one strand, after which they begin to weave a fishtail out of it in the classical way. For convenience, the hair at the junction can be temporarily held with an elastic band.

When the hairstyle is ready, the elastic band is carefully removed. Another hairstyle option is to braid each strand into a “spikelet”, then the braids are braided to the back of the head, after which they are combined into one. This hairstyle is a combination of a fishtail and a fishtail.

After the braids are tied together, the loose ends of the hair are combed. If you want to hide the elastic at the junction, wrap it in a strand of hair and secure the free end of the strand with bobby pins.

How to braid a side braid using the fishtail technique

To braid a braid on one side, you need to divide your well-combed hair into two strands and throw them to one side. In this case, the braid begins to weave from below, in the ear area. For convenience, you can hook your hair into a ponytail using a thin pharmaceutical elastic band.

After the braid is ready, the elastic is cut and the base of the hairstyle is carefully straightened. The side on which the braid is braided usually depends on the leading hand: for right-handers, right, for left-handers, respectively, left.

For a more complex and interesting styling, weaving from the temple is used:

  1. Two thin strands are separated above the forehead and a braid is woven, going sideways to the middle of the ear. The strands should be thin.
  2. The tip of the resulting braid is temporarily fixed with an elastic band.
  3. The free part of the hair is divided in half.
  4. Remove the elastic from the braided braid and attach strands of the braid to the loose strands of hair.
  5. The braid is braided further using the classical technique to the desired length, the end is fixed with an elastic band.

How to do a reverse fishtail (reverse braiding)

To make your hair more interesting, you can braid it in reverse:

  1. At the top of the head, three strands of hair are separated and crossed, as if a regular braid is being woven, but the strands should not be passed one on top of the other, but drawn from below. It is enough to do this once so that you have two strands of different thicknesses in your hands.
  2. We take a narrow strand from the side of the thinner strand, draw it under the main strand and attach it to the second part of the hairstyle. At the same time, take a narrow strand of loose hair from the same side.
  3. We repeat the operation on the other side.
  4. So, passing narrow strands on each side, one under the other, we braid.
  5. When there is no more free hair for additional ties, weaving continues on the already formed braid. The end of the braid is fixed in any convenient way.

It is important to pass the strands from the bottom, this is what will give the hairstyle a kind of bulge and volume.

This braid looks as if it is lying on top of the hair.

How to weave a fish tail around your head in the shape of a wreath, step by step lesson

The fishtail can be placed around the head. To do this, weaving begins at the temple and leads it to the side above the forehead. In this way, you can not only style your hair like a wreath, but also create complex patterns: zigzags, “snails”, etc.

An easier way to style your braid in a wreath shape:

  1. Braid the fishtail from the side, starting from the ear, as if braiding it to the side.
  2. Raise the braid and place it on your forehead in the shape of a wreath, securing it with hairpins.

You can complicate your hairstyle by braiding two braids: one is laid in a semicircle above the forehead, the second in the same semicircle at the back of the head. The ends are secured with hairpins or bobby pins. Thus, the braids form a ring around the head.

Photo diagram: how to braid two fishtail braids

There are two hairstyle options with two fishtail braids:

  1. Two symmetrical braids on both sides of the face. In this case, the hair is divided into two equal parts, each of which is alternately braided using the fishtail technique. You can start weaving from the temple or from the bottom of the ear.
  2. Two braids are braided from the temples. In the area of ​​the back of the head they are connected together with an elastic band, and the resulting tail is combed.

This hairstyle goes especially well with folk and country styles.

Triple fishtail

The technique of weaving such a braid differs from the classic “fishtail”:

  1. Carefully combed hair is divided into three equal parts.
  2. Each part is braided into a regular three-strand braid. In this case, the middle braid begins to be woven slightly lower than the two side braids.
  3. When the braids are ready, they are woven into one, also in the classical way. Due to the fact that the beginning of the side braids is higher than the middle one, the base of the overall braid looks like a semicircle. This hairstyle looks especially beautiful on thick wavy hair.

This weaving using ribbons looks more impressive.

Braided fishtail with constrictions, photo

An original version of the hairstyle can be adding constrictions during the weaving process. In this case, the braid begins to be formed from the crown.

Only the central hair is woven into it, and the remaining strands from the sides are captured in the ponytail and added to the braid at certain intervals. The number of constrictions depends on the length of the hair; usually 3-4 are done.

How to weave a fishtail hairstyle with elastic bands

During the braiding process, you can grab the hairstyle along its entire length several times with rubber bands, and then continue braiding.

How to make a fishtail braid voluminous and fluffy

A fishtail hairstyle is not harmed by slight dishevelment and negligence. Moreover, with its help you can visually add volume and fullness to even thin and sparse hair. To do this, the hair is braided freely during the hairstyle creation process. When the braid is ready, the strands are pulled out slightly. You need to start doing this from the top.

If a volume effect is needed, the entire spikelet link must be pulled out. By pulling a small amount of hair from the end of the link, the braid will look lacy.

Original fishtail braid design using colored hair chalks

Highlights look especially impressive in this hairstyle. If your hair is not dyed or is dyed in one tone, you can achieve a similar effect using temporary dyeing, for example, with crayons.


Having figured out how to weave a fishtail, you can dye the strands both separately and after weaving

You can color individual strands before creating your hairstyle, or go over the top with crayons when the braid is ready.

What accessories are suitable for a fishtail hairstyle, photo

For an everyday option, an elastic band will suffice. However, since you can weave a fishtail in a variety of ways, and each time it will look different, you can choose a variety of accessories to style your hairstyle.

Depending on this, the image will be more romantic, bright or even informal. For decoration, you can use hairpins, beads, hairpins, flowers, ribbons, feathers - as much as your imagination allows. The main thing is that the jewelry matches the overall look.

How to braid your own fishtail

Before you start weaving a fishtail for yourself, you need to understand how it is done and practice the technique of movements.

To do this, it is best to first practice on another person or on a doll. The hairstyle option is chosen based on desire and skill level. For convenience, you need to follow simple rules:

  1. At first, comb your hair well.
  2. To prevent your hair from getting tangled and to be more manageable, you need to lightly sprinkle it with water.
  3. Until the skill is developed, it is necessary to ensure the possibility of visual control of the process. For this, a three-leaf mirror or two mirrors installed opposite each other are best suited.
  4. To be able to grab your hair during the braiding process, if you have to be distracted by an unexpected phone call or if your hands just get tired, you need to prepare a crab clip in advance.

Fishtail weave. Video lessons

The first video demonstrates a technique that will teach you how to weave a fishtail:

In the second video, the girl shows how to weave a fishtail for herself:

Weaving such a stylish hairstyle as a fishtail, with a little skill, is not difficult and quite quick. Therefore, it is worth spending a little effort to master the technique of creating it, because it looks much more interesting and attractive than a regular 3-strand braid. And numerous styling options make it universal and almost unique.

Beautiful hair has always been the dignity of any girl. The most popular hairstyle is braids. They were, are and will be in fashion. And this is not at all surprising. There are a huge number of variations and weaving techniques.

The principle of braiding is the basis of an ordinary spikelet or, in other words, a three-strand braid. The main thing is to understand the weaving technique and be patient. And then just have time to experiment and improve yourself.

Braids are ideal for those with thin hair. With their help, you can visually add volume to even the thinnest hairs. Pull out the strands, make an openwork weave - and now your hair has been transformed.

Don't be discouraged if you can't braid it the first time. The main thing in this matter is perseverance and patience.

Today we will tell you how to braid a fishtail braid in reverse. This braid turns out very gentle and cute. Perfect for everyday life, a fishtail braid can be woven in combination with other techniques, adding additional elements to the hairstyle, and can also be used as a festive option.

Fishtail braiding technique

  1. Comb your hair thoroughly. Divide them into two parts with a vertical parting.
  2. Start weaving from one side. To do this, separate a strand at the temple and divide it into three parts. Pin the other one with a clip so that the hair does not interfere.
  3. Start braiding like an inverted French braid: place the left strand under the middle one, and then the right one.
  4. Connect the outer strands together, so you get 2 main ones.
  5. Separate the thin part on the side from the left one, transfer it through the bottom to the right one as in the photo below. From the same side, take a tie-in from loose hair and add it to it.
  6. The same thing with the right - separate a part, place it through the bottom to the left side, and then add a tie-in from neighboring curls there.
  7. Further weaving is done with an inverted fishtail braid using the same technique. Alternate weaves, first from the left, then from the right side, each time separating a part of the hair from the main strand, moving it from below, in the opposite direction, and adding a pick-up from free curls.
  8. After the tie-ins are finished, finish the fishtail braid using only the side strands in the same way.
  9. Tie the end of the braid with an elastic band.
  10. Weave on the other side using the same technique.
  11. That's it, your fishtail braid is ready!

You can make one braid or use a side braid.

The pigtail got its interesting name due to its external resemblance to a fish tail. It is also called a spikelet or mermaid tail. It is suitable for going out, school or college, walking with your baby and as an everyday hair item. It is elegant, original, comfortable and simple. The article describes how to weave a fishtail braid, describes the necessary steps step by step with photos and presents various variations of the hairstyle.

The hairstyle can be done starting from the temples, from the crown, in the French style, or by making a high ponytail, from which a fishtail braid is made. The weaving pattern is the same for everyone everywhere, it consists of two strands, the only difference is where to start braiding.

Step-by-step weaving of a spikelet:

  1. We divide the hair into two equal halves, after combing it. If the hair is unruly, then treat it with mousse or sprinkle it with water.
  2. From the right half from the right edge we take a thin strand and transfer it to the left half from its right side.
  3. From the left half we take the same strand from the left edge and connect it to the right half as in the diagram.
  4. Repeat the second and third steps alternately.
  5. At the end of the braiding, secure the resulting braid with an elastic band or other clip.
  6. To give the resulting hairstyle volume, straighten the braid and stretch it slightly to the sides.

How to do a French fishtail braid

In the French style, weaving starts from the crown. It is necessary to divide the hair into two halves in the part of the head where you want the braid to begin. Next, we collect the hair according to the above scheme.

Hairstyle for mothers on maternity leave

The spikelet is perfect for mothers with small children. It will collect tangled hair, will last a long time and look stylish and neat. Making a mermaid tail is easy and quick if you learn how to weave. As an everyday hairstyle, you can do a slightly disheveled braid in a free style, as in the photo.

Design options for cornrow braids for different occasions, photo

Another variation is a high braid. It can be worn when going out or used for everyday decoration. To make it, we collect a high ponytail on the top of the head, secure it with an elastic band and braid it further according to the pattern. You can wrap the elastic band with a strand of hair, so the hairstyle will look more interesting.

Two spikelets look cute and at the same time very stylish:

A fishtail with loose hair looks original.

A braid in the shape of a shell or a zigzag is suitable for festive events.

A braid made obliquely and gathered into a bun is an excellent option for both celebrations and everyday wear.

A spikelet on long hair looks interesting and festive.

A mermaid tail for girls is the perfect hairstyle for every day.

A spikelet on the side is the most convenient way to braid it yourself.

Another way of weaving looks very beautiful:

The fishtail braid is universal and fits almost any style and look. You can experiment with it and choose several types for different occasions.

Watch the video tutorial to clearly see how weaving occurs.

The fishtail braid or, as it is also called, the pike tail, is one of the fastest and most versatile hairstyles. Recently, such braids have become very popular, the reason for this was the shows of reputable brands, photo sets from glossy magazines, as well as pictures of popular Internet bloggers. So, if you have not yet mastered the fishtail braiding, I suggest you consider several interesting ways to create this hairstyle.

How to weave a fishtail

Divide all your hair into two equal parts. Grab a small section of hair from the left outer side and move it towards the right side of the hair. Then vice versa - grab a small bunch from the outer right side and move it to the left.


How to braid a fishtail

In the same way, alternately shift the strands in one direction and then in the other. To make the braid beautiful, try to capture small tufts of hair.


The braid is ready!

After completing the braiding, secure the hairstyle with a hair clip or elastic band. After that, it is recommended to stretch the pigtail a little so that it becomes voluminous.


An ordinary “pike tail” can be made more original, for example, if you use false strands, which, by the way, are extremely popular this season. In addition to color, extensions will also add volume to your braid.


Reverse fishtail

Another interesting option is the reverse or reverse fishtail. Weaving such a braid is similar to making a French braid. That is, the woven strands need to be applied not on top of the main ones, but underneath.

Just like an inverted French fishtail braid, you can make it voluminous. To do this, you need to pull out strands from each segment of the braid. Make sure that the elongated strands are the same size. You can learn small but very important tricks that allow you to create a truly beautiful reverse fishtail in the video below.

After learning the weaving technique, you can experiment with the placement of the braid. For example, a fishtail on one side will look very good. Creating such a hairstyle is similar.

How to Weave a Fishtail to the Side

In the area of ​​the left temple, grab two small strands of hair and begin braiding. Each time, together with the braided strand, grab the loose hair on the right and left (alternately). This technique is very similar to weaving a regular (straight French braid). Weave the strands, gradually moving the braid to the right.




You can change your hairstyle a little, for example, reaching the middle of your head, twist your hair into a flagellum, and then continue weaving the “pike tail” again.


Braiding a “fish tail”

In general, you can come up with a lot more options: braid a braid with a zigzag, a “basket”, include various decorative elements in the braiding, etc. Finally, I offer a small selection of interesting ways to braid a fishtail.