Crochet Irish Lace Swirls. If you need to continue tying with a crawfish step, the work should be turned over! The result is a beautiful element of Irish lace. Motif IR mesh bud with stem: video master class

Master class on crocheting decorations for a vest with Irish lace "Curl".

In order to make a curl, first we tie the “caterpillar” cord. In the photos below I show how this cord is knitted.

We extend the length of the cord to the edge of the curl, look at the selected length on the product.
We knit a chain of 6 chain stitches. In the 3rd loop we knit a single crochet. In 4, 5 and 6 loops there are 5 double crochets.

Then we knit 5 double crochets, 2 half double crochets, 1 single crochet. We insert 1 air loop between the columns. These posts cling to the cord. Pull the loops from the wrong side of the cord, not over the edge.

We turn the knitting and knit single crochets behind the front wall of the lower loops. Depending on how long the curl should be, we knit the number of stitches. The fewer columns, the longer the curl will be.

Using the principle of the first curl, we perform the second curl. We knit again a chain of 6 air loops, on it the columns of the curl itself and proceed to knit the columns on the back wall of the bottom row. It turns out to be a scar across the face from single crochets of the previous row.

At the end, I knitted 3 curls without gaps onto a chain stitch and at the end I made a chain of 4 chain loops into which I knitted 3 single crochets.

We also produce other decoration elements.

leaf

Along the contour I tied it with single crochets. The base is a braid made of air loops, tied with single crochets. To create a bend, we knit several stitches into one loop.

Rostock

The base is the “Caterpillar” cord. Connected at the end in a curl, along the edge of the cord there are arches made of 3 air loops, which are tied with single crochets.

Please attach all details to knitted product and baste with a thread of a contrasting color.
Sew along the edge of the Irish lace using hidden stitches. The cord is sewn on both sides. There is no need to sew it tightly - you won’t tear it off; if you want to change the decoration, it should come off easily. The threads with which it is sewn are tucked from the wrong side of the main knitted product.

Irish lace is a knitting technique in which individual elements (flowers, patterns) are made, and then they are combined into a single product. According to legend, this knitting technique came to us from Ireland. Sailors who were at sea and bored at home knitted different patterns from ropes, and then combined them into one weave. The finished product looks very beautiful, but to create it the needlewoman will have to spend a lot of time and effort. Let's look at detailed lessons on how to create Irish lace patterns with descriptions.

Romanian lace. Detailed master class for beginners

Romanian lace is also called lace technique. The basis of the pattern here is a lace, which is knitted in a wide variety of ways. This technique has not gained much popularity, but despite this, the products turn out amazing.

We begin the work of weaving the cord. For this we need a cotton thread with a corresponding hook. We knit according to the pattern.

Method number 1. Ideal for beginner needlewomen

This type of cord is the main one and is called “caterpillar”. In the Romanian lace technique it is used most often. The “caterpillar” will look good not only from cotton yarn, but also from silk, wool and mixed threads.

Method No. 2 is also easy to perform and is suitable for beginner craftswomen

The third way to make a cord for the Romanian lace technique. It is more complex, but very beautiful

Method number 4 is called lace cord

Motif IR mesh bud with stem: video master class

https://youtu.be/NIxkHMTlIb8

Master class on practical application of Romanian lace techniques

Romanian lace, in its technique, belongs to the coupling lace. It is performed as follows: the outline of the desired pattern is applied to the fabric, and the finished cord is laid out on top of it. Using a sewing needle, the spaces inside the outline are filled.

For work we need:

• thick eye embroidery needles;
• sewing needles;
• durable fabric;
• pencil;
• tied cord;
• threads are thinner than those used for the cord;
• the threads are thicker than those used for the cord.

The simplest pattern in the Romanian lace technique is a leaf. It is perfect for beginners.

Let's take a closer look at the lessons of making one of the motifs using the Romanian lace technique.

We draw a sketch of the pattern on the fabric, and then lay out and baste the cord along the contour.

Sew the cord to make petals

Now fill them in as shown in the picture

The result will be such a beautiful flower

We make the middle according to the following photo

Carefully cut off the basting and detach the flower from the fabric. One of the motives is ready. Using the Romanian lace technique you can create more complex patterns. Motifs can be combined into a single product, for example, a tablecloth, clothing, accessory, or used as an independent work (decor, napkin, curtain cord, etc.).

Master class: Openwork napkin using Romanian lace technique

For work we need:

• thick cotton thread;
• matching hook;
• sewing needle;
• thick fabric;
• piece of polyethylene

First, select a design and then apply it to paper. We place the paper on a fabric folded in half and cover it with polyethylene. Please note that there should be no offsets between layers.

Let's start knitting the cord. We cast on 3 ch, then insert the hook into the second of them, and then into the first. There are 3 finished loops on the hook. We knit the first 2 loops together. There are 2 loops left on the hook. We knit them together, leaving 1 loop on the hook. Turn the product counterclockwise and repeat all the work described above. This way you need to tie a long cord. Place the finished product on the outline of the design and sew tightly. Next, embroider inside the outline, as shown in the pictures. When the work is finished, carefully cut the thread between the layers of fabric and remove the basting. The napkin using the Romanian lace technique is ready.

Paisley pattern: video mk for beginners

Master class: Swimsuit crocheted using Irish lace technique

A stylish swimsuit in bright colors, and even knitted by hand, will undoubtedly attract admiring glances from the entire coast. This master class with detailed diagrams will show that such a swimsuit is not difficult to knit even for beginners.

The model is crocheted. The finished product will fit size 42-44.

To knit a swimsuit you need to prepare:

• 100g red cotton yarn;
• 25 g of the same yarn in other colors (pink, yellow, green, light green);
• bobbin threads of matching colors;
• sew-on rhinestones with a diameter of 5-7 mm;
• polymer rings (diameter 2 cm);
• hook No. 1.5;
• sewing needle.

Before we start knitting a swimsuit, you need to make a pattern that matches the size and characteristics of your figure. It should be made from elastic fabric. Then we try it on and, if necessary, make adjustments. On the swimming trunks pattern, we mark places for decoration, and then knit a sample (double crochet) to calculate the number of loops.

We start knitting a swimsuit from the bottom of the swimming trunks, following the contours of the pattern. Next, we move on to decorating the bust and the top of the swimming trunks. You need to crochet different motifs of Irish lace - flowers, leaves, rings, and then tie them with a crawfish step. Execution diagrams are given below.

We lay out the motifs on the pattern, after which we sew the contacting parts together with bobbin threads of the appropriate tone. We trim the swimsuit along the contour with a red caterpillar cord. Next we make the bodice. We lay out the motifs and sew together the touching parts. We decorate the center of the flowers with rhinestones. We tie the rings with 6 single crochets, and then sew them to the upper side corners of the swimming trunks and between the cups of the bodice.

Putting together a swimsuit. We pull the caterpillar cord through the side rings of the swimming trunks and bodice, and tie it into a bow. To form the straps, we tie the rings, connecting them in the process, and then sew them to the corners of the bodice. The swimsuit is ready.

Also, with the help of Irish lace you can decorate a finished swimsuit and thereby make it exclusive

Master class: Knitting “Indian cucumber” or “Turkish bean” motifs

This master class will show you how to crochet oriental paisley motifs, which are also called “Indian paisley” and “Turkish bob”. The pattern is a decorative ornament in the shape of a drop, which came to us along with oriental fabrics from India and Persia. Later, the main place of fabric production was the Scottish city of Paisley, which gave the name to the pattern. Openwork crochet does not bypass such an interesting and fashionable ornament. Its implementation is not difficult, so it is suitable for beginners.

To crochet Indian cucumber (Turkish bob) you need to prepare:

• some yarn;
• hook;
• bourdon threads.

Burdon is threads folded 3-4 times, which are used for tying instead of air loops.

We begin knitting Turkish bob motifs by casting on 6 air loops, which should then be tied with 8 sc. Then we do 4 in. p. rise, from which we knit double crochets, while making 1 stitch between them. p. Connect the chain into a circle with a half-column, then knit 4 sts. p., skipping 1 sbn, and in the next one knit s3n.

Now we attach the bourdon threads and tie them with sc. When the Irish lace pattern reaches an acute angle, cast on 20 in. p., close them into a ring, having first retreated 5 loops from the end of the motif. We continue to tie the Turkish bob sc. We make the last row according to the following pattern: 3 sc, picot from 4 v. p. (insert the hook into the back half-loop).

Master class “Crocheted bag using Irish lace technique”

Consider a tutorial on how to knit a bag decorated with Irish flowers and leaves. Despite the detailed diagrams with descriptions, it will be difficult for beginners to complete the task.

For knitting bags we need:

• 275 g of golden beige yarn, which contains 80% viscose and 20% metallic polyester;
• 25 g each of green and cream colored yarn with the same composition;
• hook No. 1.5;
• approximately 20*45 non-woven fleece;
• transparent and colored sewing threads;
• 1 pack of artificial pearls with a diameter of 3 mm;
• tracing paper

The size of the finished product is approximately 22*28 cm.

Basic pattern. The number of loops in the initial row should be a multiple of 4+2+1 lifting loops. We knit according to pattern 1.

When knitting in width, we start with loops before the repeat, then we constantly repeat the repeat, and end with a loop after the repeat.

From the first to the fourth row we perform 1 time, after which we constantly repeat the third and fourth rows.

Master class on knitting flowers using the Irish lace technique. We take a cream-colored thread, make a ring and work 12 single crochets into it. We continue crocheting according to pattern 2, being sure to follow the direction indicated by the arrows.

From the first to the ninth row we knit 1 time. Please note that in the 4th, 6th, 8th round row, insert the hook only behind the back wall of the corresponding loop.

Lessons on knitting leaves using the Irish lace technique.

Using green yarn, we cast on a chain of 11 air loops + 1 lifting loop and continue knitting according to pattern 3. Pay attention to the direction of the arrows and follow it as you work. In the second and subsequent rows, we make single crochets only by inserting the hook behind the back wall of the corresponding loop.

Let's start doing the work. We start with cutting. From cotton lining fabric we cut out a rectangle measuring 46*31 cm, and from volumenfleece we cut out handles measuring 7*40 cm. The specified parameters include seam allowances of 1 cm.

Let's move on to the handles. We will also make them in golden beige color. We dial 11th century. p. and close the chain into a ring. We knit in a spiral sc, and knit 1 sc into each sc, inserting the hook behind the front wall of the loop of the previous row. Finish the work at a distance of 40 cm from the starting row.

Knit Irish motifs according to the pattern - 4 flowers and 16 leaves. Connect the flowers sequentially along the arrows.

According to scheme 4, assemble flowers and leaves, then starch and decorate with pearls. Unfold the short edges of the bag so that there is a wide strip of fabric between them. Sew an overlapping floral motif onto this strip.

Connect all seams of the lining fabric and finish with a zigzag.

We roll the handles into a strip along the longitudinal side and sew them together by hand. Sew the edges of the handles to the main part.

Thus, a master class on knitting and using Irish lace shows how popular this technique is now. With its help, you can make both simple patterns for beginners and complex work for more experienced craftswomen. You can also decorate children's clothes with Irish lace patterns.

Every day Irish crochet is gaining more and more popularity. They are increasingly appearing online diagrams, video tutorials And . We decided to select the most interesting of them that are related to crochet.

How to crochet in Irish style.

A selection of Irish crochet lessons

Irish lace patterns are undoubtedly a luxury item. Their presence on clothing makes it more expressive and unique. Initially, styles and patterns were borrowed from other European countries. But gradually lace with its own patterns, made by the hands of Irish craftswomen, gained great popularity.

And here are the promised videos.

The tendrils of a flower have cones.
An element of Irish lace is a flower with voluminous cones. A long video lesson from the master Tatyana Litke.

Crochet curl(video lesson on knitting).
This lace motif is convenient to use in Irish openwork knitting. The length of the curl depends on the length of the initial air chain. A 5-minute video shedding light on the secrets of knitting curls in the Irish style.

How to crochet a curl.

Another portion of secrets from Tatyana Litke. If you want the curl to turn out in the opposite direction. To do this, when you twist the track cord at the end, pulling out the loops, you need to pull out the tie loops not from the top of the cord, but from the bottom of the track cord.

Crochet flower(video lesson on knitting).
An element of Irish lace is an openwork, voluminous crocheted flower.

How to knit a flower.
A 10-minute lesson on the process of knitting a flower. If you are tired from lessons and want to take a break, we offer you interesting information about the beauty surrounding this wonderful art.

Knitted trefoil flower crochet
Crochet trefoil flower.

How knit flower bud crochet
An element of Irish lace is a flower bud crocheted using a “caterpillar” cord.

Openwork leaf with veins.

How to knit a mesh.
Irish, guipure and stacked lace - assembly, joining of elements using an irregular mesh. The process of my work.

Traditionally, Irish lace knitting can be found on wedding dresses. - this is a process for which they prepare for several years, selecting all the best, including the bride’s wedding attire.

Processing darts in lace

When making products using the Irish lace technique, you have to face the problem of maintaining darts. Without pretending to be an academically correct method, I’ll tell you how I do it.

they roughly coincided with each other. (see 2 leaves on the left)

Then we connect the dart on the reverse side with pins or basting with thread, whichever is more convenient.

Take an unnecessary skein of yarn or a folded rag.

Place it under the pattern at the location of the dart.

This way we get a relief surface that follows the contours of the chest.

It is in this form that we connect the motifs with an irregular grid.

We get invisible darts that follow the contours of the body. Next, you can pull out the embedded skeins of yarn, straighten the underlying fabric again and continue working.

http://www.livemaster.ru/topic/19439

Caterpillar-curl"
In Irish stacked lace, a “caterpillar” lace is often used. Sometimes the “caterpillar” replaces the branch on which the leaves or flower stem are attached. But it can be used as a separate decorative element, for example, in the form of a curl.

First, you need to knit the “caterpillar” lace itself and choose a thread color that matches the original one. If you knit with the same color, the curl will be “lost” and the part will look like a circle with a tail.

http://www.livemaster.ru/olgemini

Tunic "Celtic Saga"

from Olga Krivenko

a holiday gift for everyone - a new tunic with Celtic patterns.

Yarn - Vista, Tenderness, Tulip, Camellia, linen and regular forty. Hook for motifs - 1.25, mesh - 0.6.

First we tie a very long cord - a “wide caterpillar”. (See the blog for how it fits).
We impose flowers, leaves, traditional motifs on the bourdon. And then we lay it all out in the intended pattern...

Thus we lay out the pattern of the front, back, and sleeves.

Then we sew together the joints of the motifs and fill the space with a mesh.

Then we also connect the side parts and sleeves using stitching and mesh.

We attach the sleeves to the finished part with a mesh.

We knit a lace and insert it into the loops.

And we get this “candy”...

We knit 2 air loops.

The next one will be a double crochet stitch.

Since the motif in this place turned out to be quite close, we immediately knit a double crochet, clinging to the fabric.

chains of different numbers of air loops, then columns with 1-2-3-4
yarn overs.

Having reached the end point, we cut off the working thread and hide the tip in the fabric.

If the distance to the next empty gap is small enough. you can do it differently

lesson-2) continuation

If
distance between empty spaces resulting from stitching
motifs, quite small, for example, 1 leaf or petal
flower, then the working thread can not be cut off, but continue knitting. So
Since the connection occurs from the wrong side, the thread will not be visible
from the face.

So, having reached the end point of the space filled by the grid, having done
last attachment to the canvas, we collect a chain of 3-4 air
loops

We hook the final loop to the fabric with a connecting loop, stretching the resulting chain to the required distance.

We proceed in a similar way at all small spaces between motives.

This way we get a beautiful lace fabric.

If the distance between the empty spaces resulting from stitching the motifs is small enough, for example, 1 leaf or flower petal, then the working thread can not be cut off, but knitting can be continued. Since the connection occurs from the wrong side, the thread will not be visible from the face.
So, having reached the end point of the space filled by the mesh, having made the last attachment to the canvas, we collect a chain of 3-4 air loops.

We hook the final loop to the fabric with a connecting loop, stretching the resulting chain to the required distance.

Next we dial again 3-4 air loops and also connect to the edge of the canvas.

If there is another small gap between the motifs, we again cast on a chain with a sufficient number of loops and hook it to the canvas.

We proceed in a similar way at all small spaces between motives.