Office sundresses. Office sundress or dress for a business woman Fashionable sundresses for the office pattern

03.04.2024 -

Dear seamstress girls! Beginners in sewing! Today's post is for you. Because today we will look at the 4 lightest models of a summer sundress, and the best part is that a pattern for such a sundress is not needed)).

Initially, sewing any, even simple, thing involves several stages:

Construction of a specific model based on a pattern
Actually sewing (tailoring includes knowledge of certain sewing technologies, depending on the choice of model)

This entire list, of course, will not be to the liking of a novice seamstress. But summer is in full swing, and I want something new right now!..So today we will sew a sundress without a pattern.

Let's start with the elastic model...

This model is based on a rectangle. As a rule, the width of the rectangle = the width of the fabric, and this is usually 140-150 cm.

The height of the fabric rectangle depends on the desired length of the sundress. We measure the length from the level of the armpits on the figure.

The next step is to measure the area at the top of the width of the fabric, which we will sew with an elastic band. Usually, either the bodice area alone or the upper part of the sundress up to the waist is sewn with an elastic band.

We will use an elastic thread for this process, and here we have two options:

sew the elastic thread in a zig-zag pattern, simply applying it to the wrong side of the fabric (in the process, be sure to stretch the elastic thread to create a gather)
or insert an elastic thread into the bobbin, then the process will be even more pleasant and automatic

Now you need to determine whether the horizontal gathering on the elastic thread will fill the entire part of the sundress to the waist (then we sew this part of the fabric with an elastic band to the waist, the distance between the horizontal lines = 1 cm approximately):

If the elastic thread does not completely fill the upper part of the sundress (as in the photo below), then we sew four lines on top (for a tight fit, since one line will not give it), and we also sew four lines with an elastic thread at the waist:

We will get a rectangle assembled with an elastic band. We sew both sides of it - this will be either the side seam or the back middle seam of the back.

All that remains is to process the bottom cut of the sundress.

Fold 1 cm of fabric over to the wrong side, sew it with a straight stitch, or iron it, then fold it another 1 cm and sew it on the right side of the fabric. The result will be processing the cut with a double hem.

The sundress is ready)).

Sundress without a pattern with a tie around the neck

Now let's look at another simple and interesting model.

This sundress with tie around the neck. What does it consist of? From two rectangles, sewn on the sides and connected at the neck with a ribbon, the ribbon is tied into a bow.

What measurements will we need?

sundress length (measure from the base of the neck to the front)
semi-hip circumference
the distance from the point of the base of the neck (where the neck and shoulder connect - I’m writing in simple language, in more detail) and the point of the middle of the armpit (raise your hand and measure to the point where the side seam will begin).

We cut out two rectangles from fabric with a length = the length of the sundress + 4 cm for allowances and a width = the half-circumference of the hips + an increase in freedom (5-8 cm, for example).

We retreat 10 cm from the upper horizontal line on the sides, from this point to the side we set aside the distance that we measured (from the neck to the armpit), and cut off the resulting angle (as in the figure below on the left). We make a drawstring along the upper cut, folding the fabric to the wrong side.

We process both rectangles in this way.

Sew the rectangles on the sides.

We make a long ribbon and thread it into the drawstring. We hem the bottom of the product.

Strapless sundress (without pattern)

This sundress is also based on a rectangle, the width of which is slightly larger than the circumference of the hips. Length = desired length of the sundress.

Sewing steps:

Sew the side sections of the rectangle. There will be one side seam, or it will be the middle back seam.
We measure the circumference above the chest under the arms with an elastic band, cut off the desired length of the elastic band.
We sew elastic into the top edge of the dress.
We cut out a strip for ruffles (gathering) with a height of 12 cm and a length = girth under the bust multiplied by 1.5.
Sew the gather evenly to the top edge of the dress.
If desired, sew another elastic band to the waist.
If desired, the sundress can be fitted a little.
We process the bottom cut with a hem.

The sundress is ready! We wear it with a belt.

Trapeze sundress without pattern

The sequence of actions is as follows:

Cut out two squares with sides 75 cm.
We fold them in two layers.
Let's narrow them a little towards the bottom.
We measure the distance between the points on the shoulders. Place a dot in the center of the fabric. We set aside half the measured distance from the center. We put points A and A1.
From point A we set aside the shoulder width (5-7 cm). Set aside the shoulder width on the other side as well.
Between the shoulders we cut out a neckline of the desired depth (7-10 cm).
From points A and A1 we cut off a corner on the fabric, drawing this line to the middle of the fabric. You should end up with an inverted trapezoid with the corners cut off, as in the picture below:

We sew these two parts along the dotted lines in the figure (along the side and shoulder seams).

We process the neck and bottom of the product.

We wear it with a belt))).

In the office, the style should be emphatically businesslike, while the clothes should be comfortable and go well with other wardrobe items. The sundress was the best fit for this role, but subject to some changes in fabrics and models.

What is a sundress for the office?

Instead of thin (sometimes too wrinkled) and bright fabric, fashion designers used wrinkle-resistant dense materials with the addition of wool and viscose.

The silhouette of the sundress has become more fitted, and instead of frivolous thin straps and a neckline, a full bodice has appeared, cut without sleeves. This circumstance allows you to wear a blouse or thin knitted knee socks under a sundress, which perfectly refreshes the appearance of the product, giving it newness. You can have a whole arsenal of blouses and sweaters in stock in order to look different every day.

Models of sundresses for the office

Your imagination and the skillful hands of a craftsman can work wonders, and your office sundress will have the shape that you like best. However, there are several options for ready-made dresses that are used for mass tailoring in light industry.

Sundress-case

The bodice of this office outfit is quite closed. There may be a small cutout on the chest. The silhouette is fitted, the lower part of the sundress tapers, forming an “hourglass”. The length of the product varies depending on preference, but most often the dress code requires that the skirt cover the knees.

This sundress can be worn over a thin golf shirt or blouse. The model is fastened with a long zipper sewn into the side seam. Thanks to this fastening system, the tailor has the opportunity to literally sculpt a woman, making the outfit quite tight-fitting to the figure.

If a feature of your physique is a massive lower part, then such a sundress will help hide your flaws and highlight your advantages.

Sundress-tunic

This model has a free flying silhouette. Most often it is sewn from knitwear. Its texture allows you to disguise fullness in the hips and waist, which is an important advantage for plump ladies of Balzac’s age.

Excessively thin women also often prefer such models so as not to once again emphasize their thinness. As a rule, the bodice of a sundress is draped.

This allows you to create original silhouettes with flowing folds. You can simply put on such a sundress through the neckline. The recommended length is knee-length, however, thanks to the loose fit, you can afford a shorter option.

Such knitted sundresses look very organic with translucent golf mesh. You can choose it to match the product or in a different shade. This will only add originality to your outfit.

Sundress with thin straps

We have already mentioned above that office sundresses differ from beach summer sundresses in the classic cut of the bodice, which is made with virtually no neckline. However, as the proverb says, “Every iron rule has its golden exceptions.”

Therefore, fashion designers designed an office sundress with straps. It is a strict straight-cut skirt, to which a part is sewn, which fits the waist like a corset, and straps are already attached to it. They are more of a decorative nature and because the outfit can last without them.

As a fastener, just like in sheath sundresses, a long snake sewn into the side seam is used. The material for such an office dress with straps can be either knitwear or suiting fabric with the addition of wool and viscose.

This sundress model is more suitable for ladies with classic shapes - wide hips and a narrow waist.

Sundress for the office - photo

Remember that at work you should look as charming as on a date with your beloved man, so don’t hesitate to experiment with colors and shapes, especially since an office sundress provides you with such a unique opportunity!

Office clothing is not like all the others. It turns out that in the office it is customary to dress according to certain rules, established and written down by special people in special uniforms. Office wear is, for example, a sundress that can be worn every day without thinking about whether it is normal or advisable.

Sewing a sundress for the office with your own hands is a dream for many women running a household. They, like many others, dream of the day when they will exclusively sew all their clothes with their own hands. And not only for yourself, but also for all your loved ones. Imagine that this day has come, that you have absolutely all the tools for sewing things with your own hands and even a pattern for a sundress for the office, which is so rare in our time.

Plus, this sundress pattern is free. Distributed on a voluntary basis from virtues. Of course, there are no instructions on how to sew; you will have to compose it yourself. But to mark some notes for yourself, to catch something from the pattern of an office sundress - why not!

Of course, all office workers must follow the rules of the dress code, but still, we should not forget that a woman should always remain beautiful. Strict white blouses combined with a classic skirt are a win-win option, but quickly get boring. Therefore, designers came to the aid of office workers - they reintroduced the fashion for such a piece of clothing as a sundress, under which you can wear either a blouse or a turtleneck. And now the wardrobe, which must comply with all the rules of the dress code, can be significantly diversified. We invite you to carefully consider the question of how to sew a winter sundress for the office for thin and overweight women with your own hands and download free patterns for beginners, which will be very simple.

Sundress for the office

Until recently, sundresses were considered only clothing for warm summer days, and were associated with rest and relaxation. But thanks to their versatility, practicality and beauty, they have firmly entered the lives of all business women. Moreover, you can even sew a women’s sundress for the fall-winter season for the office with your own hands, the main thing is to choose a thick fabric and a style that suits your figure. We propose to resolve these issues first.

Styles

Today, there are truly a huge number of styles of office sundresses. Before we figure out how to sew a sundress for work, let's understand what end result we want to see. So, today the most popular models are the following:

Sundress for the office in the form of a skirt. This model is suitable for any figure, because it perfectly hides all imperfections.

Important! Ideal for beautiful ladies with slightly plump hips.

Office sundresses with wide straps. As a rule, such models are made fitted and they look great on slender girls.

Important! The combination of this style with a strict blouse will be ideal.

To sew a sundress for work - for an interview or for a meeting, keep in mind that a style with a round neckline will add softness to the image without eliminating the business component.

Important! With such a neckline, a blouse with a bow will look very elegant and sophisticated.

For sundresses with a V-neck, both turtlenecks and blouses are equally suitable. However, it is worth remembering that with such a neckline it is better not to wear shirts with ruffles or any other decorations.

Fabrics

When deciding how to sew a sundress for the office, you should carefully approach the choice of fabrics. This season, fashion designers decided to diversify the color scheme, and to the traditional gray and black colors they added a mischievous tartan, a trendy burberry checkered pattern and a houndstooth print. The choice of materials for sewing a sundress for work is also pleasingly varied:

Tweed again takes the lead, which is not surprising. This material is very comfortable to wear. Moreover, a sundress made of such fabric can be safely decorated with a brooch or long gloves, which will transform the look, and you can go straight from the office to a corporate event.
If you don't approve of this choice, then the more familiar wool option will definitely suit your taste. This material is produced with various additives in the composition and in a wide range of colors. Even the same style made from different types of fabric will look completely different.
Clothes made from smooth, embossed, perforated leather are simply mesmerizing. It will be appropriate in the office and will add a fashionable accent to your look. By the way, such sundresses are at the same time practical, beautiful and very impressive.

Important! Before sewing a sundress for work from such fabric, prepare a few simple blouses for it, without decoration or print, so as not to overload the image with unnecessary details.

A sundress knitted with a large knit or with its imitation will be very romantic and at the same time stylish. This trend of the season looks very original and gives a feeling of comfort to its owner.
Another current accent is faux suede. Clothes made from this material hold their shape well, do not give excess shine, and go well with any blouses and turtlenecks.

Important! There are a huge number of fabric options for sewing a sundress for work. You can choose any of the dense materials that suit your taste. Leave thin fabrics for relaxation and for hot summer days.

Measurements

In order to sew an office sundress with your own hands, you will definitely need patterns. Only in this case will your office outfit give the perfect fit. This is the main advantage of sewing with your own hands. To do this you will need the following measurements:

chest girth;
waist circumference;
hip girth;
tuck solution;
back width;
shoulder width;
chest height;
back and front length to waist;
length from waist.

Important! In order to be able to wear a blouse or turtleneck under a sundress, it is necessary to make an increase in the looseness of the fit. As a standard, designers add 2 cm to all measurements. If the fabric is too dense, then the increase needs to be increased slightly. It is better to cut off excess fabric when sewing a sundress for the office than to discover that the clothes are too small for you.

Constructing a pattern

Before sewing a sundress for the office with your own hands, to create a pattern you will need to draw a rectangle with sides corresponding to ½ chest volume + an increase in the length of the product. Horizontally in the drawing you should immediately mark the height of the chest, waistline, hips and draw parallels that form an auxiliary grid. Then we begin to adjust the pattern to your measurements. To do this you will need to do the following:

Along the chest line on one edge, set aside half the measurement for the width of the back. On the other side of the rectangle, measure half the “solution” of the darts.
From these two points on the drawing, draw straight lines at 90 degree angles to the top border of the rectangle.
Now, in the corners of the rectangle on both sides, mark ¼ of the neck girth measurement, and from these points, at a slight angle, draw a shoulder seam line.
On the shelf, step back 4 cm from the intersection line of the raised “dart opening” mark and draw a dart on the other side, symmetrically to the first.
Extend the shoulder seam on the front by a distance equal to the width of the dart at the base.
Now let's do the armhole. To begin, divide half the chest volume by 4 and set the resulting value down from the measuring point “½ back width”. Then round off the resulting segment with a smooth line starting at the shoulder seam and running along the chest line.
From the center of the resulting armhole, draw a perpendicular line to the bottom border of the original rectangle.
Now determine the difference between the chest and waist volumes, and distribute the value into the side seams and two darts along the back and front.
On both sides of the rectangle, retreat ¼ of the hip measurement and draw a smooth line on the side seam.

The basic pattern for sewing a sundress for work is ready.

Important! You can also use it for sewing summer dresses, but do not forget to reduce the loose fit value by 1-2 cm.

Now all you have to do is transfer the resulting details onto the fabric using chalk or soap. Don't forget to leave a seam allowance of 1 cm and a hem allowance of 4 cm. If the fabric is very loose, the allowance can be increased slightly.

Sewing

When your pattern is ready, the details are cut out, we proceed directly to solving the question of how to sew a sundress for the office. Please note that thicker fabrics will require thicker threads and needles. The whole process takes a little time if you follow the following instructions:

First of all, you need to sew the chest darts. If your future sundress has waistbands, then they should also be processed before you start connecting the parts. We iron the finished darts according to the following principle: chest darts look up, waist darts look towards the center of the product.
Connect the shoulder seams of the front and back. If the fabric is thick, it is better to sweep these parts by hand in advance to fix the material. Then the seams need to be processed using an overlocker or a zigzag stitch so that the fabric does not fray. This seam must be ironed towards the back.
To sew a sundress for work, you will need to prepare in advance such details as piping the neckline and piping the armhole. These parts will follow the contours of the main blanks. The facings must be duplicated with non-woven fabric.

Important! For woolen fabrics, knitted material is best suited - it stretches, sticks well to the main fabric and does not form unnecessary folds.

Now you need to process the neck of the future sundress. Sew the facing to the neckline, retreating 1 cm from the edge. After this, it is better to cut the edge of the fabric to 0.5 cm and make small notches in the rounding areas so that your neckline lies flat, there are no folds or creases on it.
Afterwards, connect the side seams. It is also better to process the fabric using an overlocker or a zigzag stitch. The fabric should be ironed towards the back.
Now, like the neckline, you need to process the armhole line. We sew on the facing and make notches in the rounded areas. To make the facings fit better on the finished product, it is better to stitch it. We bend all the internal seams towards the facing from the inside, machine a seam on the outside, at a distance of 1 mm from the bend, sewing through all layers of fabric and then carefully steam all the kinks.
Now all that remains is to bend the product. You can sew a regular seam, but it is also worth trying the blind seam option.

At this point, the question of how to sew a sundress for the office with your own hands can be considered resolved. We looked at the simplest model. But you can change it the way you like. Based on the basic pattern, it is possible to create a variety of styles - fitted or wider at the bottom, and it is also possible to make all the adjustments and details you need.

Dress sundress

When deciding how to sew an office sundress with your own hands, patterns may not be needed. And the fabric too. An excellent office option can be made from a boring dress. To do this, you will need all the same tools as for sewing, a piece of fabric in a color or tone darker, and non-woven fabric. Then we take into account the following instructions:

On an old dress, create an armhole line, draw it directly on the dress, not forgetting to leave allowances for processing the material.
We cut off the sleeves, but don’t rush to throw them away. These details can be useful for facings or for decorating a future sundress.
We draw facings on additional fabric, repeating the line of the armhole and reinforce these parts with non-woven fabric.
Now we process the armhole, not forgetting to make notches inside the seam.
We also do stitching - this will be especially relevant if the fabric for these parts is of a different color. By securing the seams in this way, you will secure the folded area and the facing fabric will not be visible from the front side.
Now we solve the issue with length. If you decide to sew a sundress for work that will be shorter than your old dress, then simply cut off the excess. If your dress, on the contrary, was too short, then the length of the sundress can be increased with the help of a strip of lace, which is popular today even in office outfits. This insert can also be made from fabric of the same color as the blouse with which you are going to wear the sundress.

Now you know how to sew a sundress for the office with your own hands. This does not require a lot of fabric, just your time and accuracy in work. When choosing material to sew a sundress for work, take a closer look at warm woolen fabrics that will give you a feeling of coziness and comfort. You should not forget about the properties of the fabric and properly process the edges of the future product so that the clothes look neat and the seams are made with high quality. Then your favorite sundress will serve you faithfully for a long time.

Clothing for plus size women, sheath dress for plus size women, office sundress for plus size women - this is a description of this model of sundress dress. Using this pattern you can sew a business dress, an office sundress, or a little black sheath dress.

We all want to be slim. We are women who have parameters that differ from model standards. The reality is that you won’t be able to change it overnight, unless you are a wizard, of course. Therefore, let’s remember the techniques that will help you successfully present yourself in the best light. Using some tricks when creating clothes, you can visually become slimmer. As for our dress model, we used the technique of dividing the figure into vertical stripes using reliefs.

This pattern is suitable for girls and women with a chest girth from 100 to 104 cm.

Bust 100 104 cm
Waist 82 86cm
Hip circumference 106 110cm

The pattern is given in actual size no seam allowances, therefore, when cutting, it is necessary to add 1-1.5 cm for sewing seams (side seams, shoulders, reliefs, etc.), 0.7 cm for facing seams (neck, armholes), and 4 cm for the hem of the bottom of a sundress.

More ready-made patterns here:

Cut out sundress dresses

Back 1 piece with fold
Back flank 2 parts
Before 2nd part
Front flank 2 parts
Front neck facing 1 piece with fold
Back neck facing 1 piece with fold
Back armhole facing 2 parts
Front armhole facing 2 parts

Sewing a sundress

Duplicate the facings with adhesive interlining.

Sweep open sections.

Sew the barrel to the main parts of the front and back. The difficulty of this unit lies in the processing of the corners. Make notches in the corners and carefully stitch in these places. Press the seams toward the midline of the front and back, respectively. Place a finishing stitch along all reliefs.
Then stitch the shoulder and side sections and iron them towards the back.
Finish the armholes with facings, having previously sewn the shoulder and side edges of the facings: overstitch the armholes, cut off allowances up to 3 mm, sweep, iron, secure with a finishing stitch. Manually secure the facings with a few stitches to the shoulder and side seam allowances and to the relief seam allowances.
Stitch the shoulder edges of the facings, press the seams. Overcast the open outer edges of the facings.
Process the neckline (similar to the armholes).
Hem the bottom of the sundress.