DIY electronic Christmas tree. DIY Christmas trees. To make a paper Christmas tree you will need

Putting up a Christmas tree for the New Year is a good tradition supported by many families. But cutting down a living spruce in order to enjoy the beauty of the forest beauty for just a few days is not very humane. Fortunately, recently people have increasingly begun to think about this issue and make their choice in favor of artificial beauties that can brighten up the New Year holidays for many years.

To get the main attribute of the New Year into your home, you don’t have to buy a Christmas tree. It will be much more interesting to make it yourself, especially if there is no free space for a big fluffy beauty or there is an active baby in the house. Moreover, similar DIY Christmas trees– a great gift for the New Year.

If you choose colorful magazine pages, you will get a bright Christmas tree that can be placed in the nursery.

To make an original Christmas tree from pieces of a magazine you will need:

• old magazine (book with bright drawings, glossy posters, etc.);
• thick sheet of paper or cardboard;
• PVA glue (it’s better to take a glue gun);
• pencil;
• scissors (it is much more convenient to take a shaped hole punch).

Step 1. Make a cone from a thick sheet of paper, securing the edges with glue.

Step 2. Take magazine pages with bright pictures and cut out many identical circles. If you have a shaped hole punch, it will be much more beautiful if you use it.

Step 3. To make the cut circles curl a little, wrap them around the pencil for a while.

Step 4. It's time to start assembling your Christmas tree. Starting at the base of the cone, cover it in a circle with bright swirling circles. Try to make neat rows, gluing the circles tightly so that there are no gaps.

Step 5. Make a small cone from one of the circles and place it on the peak.

DIY fragrant Christmas tree made from dried citrus fruits and pine cones

Such a tree will advantageously decorate any interior, and its subtle aroma will create a festive mood.

To make a fragrant Christmas tree you will need:

• a sheet of thick paper or cardboard;
• dried lemon or orange slices;
• cones;
• puncture;
• glue gun

Step 1. Make a cone out of cardboard or thick paper. You can make several cones of different sizes at once.

Step 2. Prepare and dry citrus slices. Prepare the cones.

Step 3. Glue dried lemon or orange circles and cones onto the cone. You can make a separate citrus Christmas tree, or a separate Christmas tree from pine cones, but it is better to combine the ingredients and you will get a lemon-cone Christmas tree.

Step 4. Twist a star from the wire and attach it to the “top” of the tree.

A wonderful fragrant Christmas tree is ready!

Christmas trees made from wrapping paper

You can decorate your house with these Christmas trees, supply them to a group in kindergarten, and also present them to the teacher on the eve of the New Year holidays.

To make a Christmas tree from bright wrapping paper you will need:

• a large sheet of cardboard or thick paper;
• wrapping;
• double-sided tape and regular tape;
• scissors;
• small decorations (beads, seed beads, sequins, sequins, ribbons, etc.).

Step 1. Make a cone out of cardboard. If the wrapping paper is thick enough, then the cone can be made directly from it.

1.1. Fold the paper diagonally to make a cone.

1.2. Secure the resulting cone with tape.

1.3. Carefully trim off the excess paper at the base of your cone.

Step 2. Take some brightly colored wrapping paper and cover the cone.

2.1. Place the wrapping paper face down on the table. Tape the end of the colorful paper to the top of the cone.

2.2. Slowly turn the cone and wrap it tightly in the wrapping paper.

2.3. Attach double-sided tape to the edges of the paper and connect the end to the cone. Cut off the excess at the base so that the “bottom” is even.

Step 3. Decorate the Christmas tree as you like.

The creative Christmas tree is ready!

DIY felt Christmas tree

A soft and delicate fabric Christmas tree can be presented as a New Year gift to a colleague, friend or relative.

To make a felt Christmas tree you will need:

• felt (it is better to take felt of two or more colors in the same range to make the Christmas tree look prettier);
• cardboard;
• double-sided tape or glue;
• scissors.

Step 1. Make a narrow cone out of cardboard, securing it with glue or tape.

Step 2. Now take the felt and use scissors to cut out circles of different diameters in ascending order. It is better to use pre-prepared cardboard circles as templates.

Step 3. Attach Christmas tinsel to the base of the cone with glue or tape.

Step 4. Make a cross in the center of each felt circle.

Step 5. Sequentially put circles on the cone to the very top.

Step 6. To decorate the “top” of the Christmas tree, add tinsel, attach a star or a pre-prepared felt cone with decoration at the very peak.

Cute cozy Christmas tree is ready!

DIY glowing creative Christmas tree.

This tree will be a wonderful night light for your baby during the New Year holidays. It can also be placed on the windowsill, which will add special originality to the interior of your home.

To make a glowing Christmas tree you will need:

• floristic (flower) mesh (it is better to take a mesh of several shades of green);
• floral wire;
• cardboard or thick paper;
• scissors;
• cellophane
• PVA glue;
• pins;
• Christmas tree garland with small lights;
• additional decorations (optional).

Step 1. Roll the cardboard into a cone.

Step 2. The top of the cone should be wrapped in cellophane.

Step 3. In a deep container, make a solution of a small amount of water and PVA glue.

Step 4. Dip small pieces of floral mesh into the solution and stick them onto the cone. The joints can be coated with additional glue.

Step 5. Strengthen the structure with pins and wait until the first layer has completely dried.

Step 6. In the same way, make the second layer of the future creative Christmas tree.

Step 7 After drying, you need to remove the Christmas tree from the cone and remove the cellophane.

Step 8 Place a garland inside the Christmas tree, securing it with floral wire.

The wonderful glowing Christmas tree is ready! All that remains is to decorate the Christmas tree to your taste.

Christmas tree made from pasta

You can make such an interesting Christmas tree with your child. An exciting activity will also be useful for fine motor skills of the fingers.

To make a Christmas tree from pasta you will need:

• a cone made of foam or plastic (you can make a cone from thick paper or cardboard);
• pasta (various shapes and sizes);
• dye;
• PVA glue;
• brush.

Step 1. Prepare a cone and paint it any color.

Step 2. After the cone has dried, you can start gluing the pasta in any desired design.

Step 3. After all the pasta has been applied, they can be carefully painted, preferably in two layers.

The pasta Christmas tree is ready! Every grandmother will be delighted with such a sincere gift from her beloved grandson or granddaughter.

DIY colorful Christmas tree made of paper

A paper Christmas tree will decorate any workplace and create a festive mood for everyone who is lucky enough to see it.

To make a paper Christmas tree you will need:

• long skewer;
• colored colorful cardboard or design paper;
• thick cardboard;
• glue gun or glue moment.

Step 1. From thick cardboard, cut out a square base for the future Christmas tree.

Step 2. Using glue, secure the skewer to the base.

Step 3. From designer paper or colored cardboard you need to cut out circles (preferably with curly edges) of different diameters, 3 circles for each diameter.

Step 4. Make small holes in the center of each circle.

Step 5. Lubricating the holes in the circles with glue, gradually assemble the Christmas tree.

Step 6. Decorate the top of the finished Christmas tree with a paper star or any other beautiful detail.

Christmas cozy tree made of thread

Cute fluffy Christmas trees made from yarn will give you a lot of warm, pleasant impressions.

To make a Christmas tree from thread you will need:

• cardboard for a cone or a ready-made foam cone;
• pile yarn;
• thick yarn;
• miniature pins;
• decorations.

Step 1. Prepare a pre-purchased styrofoam cone or make a cone out of cardboard.

Step 2. Take two threads at once and secure the ends with pins at the very base of the cone.

Step 3. Wrap the threads around the base of the cone, securing approximately every 5 cm with pins.

Step 4. Wind the threads towards the top of the cone; after a full circle at the base, you can no longer secure the threads with pins.

Step 5. Having reached the top, fasten the threads and wrap the cone in a downward direction, covering the Christmas tree with a second layer of threads.

Step 6. Cut the ends of the threads at the base and secure them with pins.

The Christmas tree is ready! You can leave it in this form, but it is better, nevertheless, to decorate the New Year tree with various beads, seed beads and other decorative elements.

Creative Christmas tree made of corrugated paper

If you want something unusual, you can make a huge Christmas tree for the wall.

To make a Christmas tree from corrugated paper you will need:

• matte cardboard or foam base;
• corrugated paper;
• scissors;
• masking tape;
• stationery knife;
• PVA glue;
• marker.

Step 1. Lay the cardboard on the floor and, using adhesive tape, connect all the sheets to form a large rectangle. Black tape is used in the photo, but it is better to use white (painting tape works best).

Step 2. Draw the size of your future Christmas tree and using a utility knife, cut out a large triangle.

Step 3. Fold the crepe paper in half and cut the fringe with scissors.

Step 4. Carefully apply the fringe, starting from the base of the tree to the very top, without leaving any gaps.

Step 5. Make a trunk from a rectangle of brown paper or cardboard. You can decorate the trunk with a fringe of brown corrugated paper.

The Christmas tree is ready! You can hang it on the wall and decorate it as you wish. It turned out to be a wonderful photo area for New Year's photos.

Not a single New Year passes without a green beauty. It fits perfectly into holiday decor and is a wonderful winter gift. In this article we will look at how to make a Christmas tree for the New Year in various creative ways with your own hands.

You will need: copper tubes or wooden smooth sticks, green fringe 15 cm wide, thin wire, paper, a garland of pompoms, ruler, pliers, a hacksaw with a thin blade, a glue gun, scissors.

Master Class

1. Cut the fringe into 5 pieces of the following sizes: 45 cm, 35 cm, 25 cm, 15 cm and 5 cm. Cut copper tubes with a hacksaw, the same size as the fringe.
   
   
2. Glue the fringe to the tubes.
3. Prepare a long piece of thin wire and thread it into a 45 cm tube in such a way that both ends of the wire are the same.
   
   
4. Pass the ends of the wire through the 35 cm tube so that the right end of the wire is on the left and the left end is on the right. Thread the remaining fringed tubes onto the wire in the same way.
   
   
5. Glue on a pompom garland.
   
   
6. Make a star this way: prepare 2 squares with sides of 10 cm, fold them like an accordion, glue the top edges of each piece, then glue the 2 pieces together to form a circle.
   
   
7. Glue the star to the top of the tree, attach a wire hook and hang the tree.

The fringe Christmas tree is ready!

You will need: ice cream sticks, ruler, scissors, paints, glue gun, string, decorative elements - stars, rhinestones, pompoms, tinsel.

Master Class

Christmas trees made from ice cream sticks are ready!

You will need: Christmas tree balls with fastening in the form of loops, fishing line, scissors, pliers, chain, metal lattice, carabiner (connecting link for hanging the tree).

Master Class

Creative Christmas tree

You will need: toilet paper or paper towel rolls, scissors, glue gun, paint, sponge, decorative elements - shiny ribbon, rhinestones, sequins...

Master Class

The Christmas tree made from bushings is ready!

You will need: thick shiny green paper, pencil, hole punch, ruler, decorative elements - star, rhinestones, beads, thick thread...

Master Class

The Christmas tree box is ready!

You will need: thick cardboard, scissors, wrapping paper, double-sided tape, various decorations - beads, bows, stars.

Master Class

You will need: scrapbooking paper, compasses, scissors, wooden sticks, glue, candlesticks and caps, white paint.

Master Class

The original Christmas tree is ready!

You will need: cardboard, scissors, hole punch, glue, yarn, needle, pencil, ruler, spray snow and glitter (optional).

Master Class

1. Print out the Christmas tree template and cut out 8 pieces from cardboard.
   
2. Fold each piece in half and punch holes along the edge of each piece with a hole punch.
   
   
3. Glue 8 blanks together to form a Christmas tree.
   
   
4. Decorate the Christmas tree with snow.
   
   
5. Sew yarn around the edges of the tree as shown in the image.
   
   
6. Cut out a star from cardboard, decorate it with glitter and attach it to the top of the tree.
   
   

You will need: felt in green shades, foam cone, glue gun, scissors, pencil, star.

Master Class

The felt Christmas tree is ready!

You will need: paper, stationery knife, scissors, hole punch, thread, template.

Master Class

Hanging Christmas tree

You will need: colored paper, saucepan lid, pencil, scissors, tape, thread, needle.

Master Class

1. Trace the lid on a piece of paper.
2. Cut out the circle.
3. Cut a quarter of the circle, then tape the edges together.
4. Make 3 blanks this way.
5. Thread the pieces onto a thread, forming a Christmas tree, and secure each piece with a knot.

The hanging Christmas tree is ready!

You will need: magazine, decoration elements - stars, rain...

Master Class

The Christmas tree from the magazine is ready!

You will need: cardboard, strawberries, chocolate.

Master Class

1. Make a cone out of cardboard.
2. Melt the chocolate in a water bath.
3. Attach the strawberry to the cone using hot chocolate as glue.
4. Draw a star with chocolate, wait until it hardens and decorate the top of the strawberry Christmas tree.

Strawberry Christmas tree is ready!

You will need: scrapbooking paper, white sheet of cardboard, twine, glue, decorative elements - buttons, star.

Master Class

1. Roll up tubes of scrap paper.
2. Adjust the length of each tube and lay out the Christmas tree.
3. Glue the tubes.
4. Make a Christmas tree leg from twine.
5. Glue buttons and a star as decoration.

You will need: foam cone, red and green ribbons, safety pins, scissors, felt, glue, golden bow.

Master Class

1. Cut a circle of felt the size of the diameter of the base of the cone, then glue it on.
2. Prepare pieces of ribbon of the same size.
3. Form a loop from a piece of ribbon, threaded onto a safety pin. Repeat the same process with all the segments.
4. Secure eyelet pins into the foam cone, placing them in circles, alternating colors.
5. Attach a bow to the top of the tree.

The ribbon tree is ready!

You will need: green and brown felt, yellow floss thread, needle, ruler, scissors, pencil, small star.

Master Class

1. Cut out 25 squares from green felt (5 squares each with sides of 1,2,3,4 and 5 cm).
2. Cut out 5 small circles from brown felt.
3. Prepare a thread and a needle and tie a knot at the end.
4. String the circles as a tree trunk.
5. String the squares, starting with the largest and ending with the smallest.
6. Decorate the top with a star.

The felt mini-Christmas tree is ready!

You will need: 3 Whatman paper, tape measure, tape, glue, scissors, green and brown corrugated paper, decoration.

Master Class

1. Connect 2 whole Whatman paper and half of the third using tape.
2. Draw a triangle 180 cm high as shown in the image.
3. Cut it out.
4. Prepare strips of corrugated paper 20 cm wide, then make a fringe.
5. Cover the entire triangle with stripes, starting from the bottom and working your way up.
6. Cut a rectangle for the trunk and cover it with brown fringe.
7. Attach the Christmas tree to the wall and decorate it to your liking.

Hello, dear readers! On New Year's Eve, an incredible amount of all kinds of New Year's decorations appear on store shelves: Christmas tree decorations, tinsel, rain, bright garlands, firecrackers, artificial and live Christmas trees, etc. Speaking of Christmas trees, nowadays manufacturers offer consumers a really wide selection of Christmas trees: tall, small, tabletop, floor, lush, elegant, white, green, multi-colored... From which we can conclude that anyone can easily choose exactly the right model of Christmas tree, which, in his opinion, will most successfully fit into the interior of a house or apartment. But today’s article is not dedicated to factory-made, stamped Christmas trees, but to exclusive Christmas trees made with your own hands!

DIY Christmas trees.

To make a decorative Christmas tree, you can safely use almost any material: rhinestones, Christmas tree balls, threads, beads, wine corks, coffee and other grains, paper, buttons, wire, cones, tree leaves, feathers, pieces of fabric, ribbons, pasta and much more!

We have decided on the materials, but how to form the basis of the future Christmas tree? You can do this in the following ways:

1. Select a cone-shaped bottle onto which to subsequently glue the necessary parts.

2. Buy a ready-made foam cone - sold in the “Everything for creativity and handicraft” departments.

3. Make it from a sheet of paper.

Let's look at the last point in a little more detail...

First way: We take a sheet of whatman paper, draw a circle, cut it out, then on this circle we mark a sector in the form of a triangle with a pencil, cut it off, and from the remaining part we form a cone, gluing the side part with tape or glue.

Second way: take whatman paper, draw a circle, measure out the fourth part of the circle - a triangle (see photo), cut out this part and form a cone.

So, having selected or made the most suitable cone, we proceed directly to the decorative part...

DIY Christmas tree ideas.

Paper Christmas trees.

We select paper of a suitable shade, cut out and form a cone (described above), decorate with rhinestones, foil stars, beads, seed beads or ribbons.

DIY Christmas trees photo

Coffee trees.

We prepare a cone from thick paper, after which, using super glue, we successively fill in all the gaps on the cone; as an addition, you can use grains of rice, seeds, acorn caps, rhinestones, beads or seed beads.

DIY Christmas trees photo

DIY decorative Christmas trees made from pasta.

We select shaped pasta, for example, bows, paint them in a suitable color from a spray can, and after the paint has dried, fix them on a cone (preferably dense foam) using instant glue. At the final stage, the Christmas tree can be supplemented with star-shaped pasta or small decorative bows.

Christmas trees made of threads.

We form a cone out of paper, take thick woolen threads that match the shade, cover the surface of the cone with PVA glue, and wrap it tightly with threads. Such Christmas trees can be complemented with bows, beads or rhinestones.

Christmas trees made from wine corks.

We form a Christmas tree from wine corks, gluing the corks to each other with super glue.

DIY Christmas trees photo

DIY Christmas trees made from buttons.

We prepare a large number of buttons; if you want the buttons to be the same in tone, first paint them using a spray can. We form a cone from thick paper and completely cover it with buttons; buttons can be glued in several layers.

Christmas tree made of cones.

We form the entire Christmas tree out of cones... starting by gluing the cones to each other from the inner circle, and finally placing the resulting tree in a pot or securing it to an improvised decorative leg made from branches.

Christmas tree decorated with sparkles.

We form a cone out of paper, finely chop the rain and tinsel, mix thoroughly, cover the cone with PVA glue and completely sprinkle with chopped glitter. Finally, we cover the top of the Christmas tree with PVA glue so that the shiny elements do not fall off.

Christmas tree made of wire.

We take a cone made of foam plastic and from top to bottom in the form of a spiral, cover it with dense wire. The result is a very stylish spring tree.

Feather Christmas tree.

We purchase small feathers in the “Everything for Creativity” departments, make a cone out of paper, and start from the bottom up, tightly joining each other, gluing the weightless feathers onto the transparent “Moment” glue.

Christmas tree made of dry leaves.

We take dry leaves or bay leaves harvested from the fall and glue them to a previously created paper cone; it is better to form a “crown” from top to bottom, gluing the leaves under each other.

In the fall, you increasingly begin to think about the coming of the New Year with its festive mood, meetings with friends and family and, of course, gifts. In addition, since childhood, we have all associated the New Year with the Christmas tree! That's what we'll talk about)

Fortunately, people are increasingly thinking that it is not worth cutting down a live Christmas tree for the sake of a few holidays. Krestik and I fully support this decision and believe that a DIY Christmas tree is much more interesting and humane! In addition, these are excellent options for those who have nowhere to put a large Christmas tree (for example, there is no free space, or there is an active small child in this free space).

We bring to your attention a large selection of master classes on creating a decorative Christmas tree with your own hands, which will serve as a wonderful decoration for your home and an original gift for a wonderful holiday!

Christmas tree made of pine cones

You can make a very original Christmas tree with your own hands from pine cones. But we will not use the whole cones, but will use only their scales so that the tree is not too bulky.

So, first, let's separate its scales from the cone. This can be done with a sharp knife, wire cutters or pruning shears.

Be careful, take care of your hands!

The next step is to make a cone from thick paper or cardboard, which will be the base of our Christmas tree. We roll the paper into a cone, glue it on the sides and cut off the excess at the base.

Then we simply take the scales in our hands and glue them in a circle, starting from the base of the cone.

You can glue each new row in a checkerboard pattern, or, like here, on top of each other.

You can glue a clove to the top of the tree (such a spice))

After the glue has dried, you can start painting our beauty. To do this, you can use spray paint or regular acrylic paint.

If you choose acrylic paint with a metallic effect, your Christmas tree will look much more impressive.

Then we cover the ends of the “twigs” with PVA glue and sprinkle glitter on them.

This is the beauty that results from these simple actions:

Using exactly the same principle, you can decorate the cone with chains and beads, decorative cords, ribbons, braid, etc.

Another very popular way to make artificial Christmas trees with your own hands is to weave them from beads. This is perhaps the most painstaking method, but for lovers of beadwork nothing is impossible!

The detailed process of weaving Christmas trees from beads cannot be contained in one article, so we are sharing with you links to master classes previously published on Krestik.

Christmas tree made of paper and cardboard

If you have nothing to do at work) or just want to add a little holiday to the office, make a Christmas tree out of paper. What's easier?)

And this tree is very similar to a designer one, don’t you think? It’s all because of colored designer cardboard, which is so beautiful and bright that you don’t even need to decorate the Christmas tree with anything else), which simplifies the process of making a Christmas tree with your own hands.

Secondly, to make a designer Christmas tree, you can use threads that are wound on a paper cone using the technology of making openwork balls.

Thirdly, flower net and bouquet net.

The technology for making these three Christmas trees is very similar, so the process of creating them is shown in one master class.

Feather Christmas tree

Yes, they do too! Feathers can be bought at hardware stores, or maybe you have supplies of bird feathers? For brightness, they can be painted with food coloring. It looks original, beautiful and so airy!

Christmas tree made of candies

A Christmas tree made from candies is not only beautiful, but also delicious! This New Year's gift will be appreciated by everyone: both adults and children! Watch the video master class from Kateryna Bay and create!

Time flies by unnoticed. It would seem that just recently we celebrated the New Year and celebrated Christmas, but outside the window it is already autumn. With the onset of the first cold weather, there is a desire to begin preparing for the upcoming holidays, delighting yourself and your loved ones with a small miracle. And the first thing that arises is the question of purchasing the most important attribute of the New Year - a Christmas tree. Without this fluffy beauty, the mood will not be the same. And the holiday will seem unreal.

But you can approach the issue of purchasing a traditional tree creatively. Just use your own imagination and ingenuity to create a fluffy beauty with your own hands, using unnecessary materials lying around the house.

What can you make a Christmas tree craft from? From anything! Moreover, it is better if you do this with your children. They will also get great pleasure from this process.

What kind of Christmas tree can you make that will please your loved ones and guests, and also bring a feeling of a real holiday? There are a few tips you should know before you get started.

The first of these concerns form. As a rule, Christmas trees are made in the form of a cone or an isosceles triangle. However, the form does not have to be correct. You can make a craft Christmas tree at an angle and with any number of tiers.

The next tip concerns the color of your piece. And it doesn't have to be green. You can make your Christmas tree white, yellow, silver, gold or even blue. Don’t be afraid to deviate from the standard rules, because your furry beauty should become a real miracle.

A very important point in the work is the fastening of the craft. This will need to be thought out in advance. The details of the Christmas tree can be fastened with tape or glue, wire and other materials. It should be taken into account that this will need to be done carefully and reliably, because the Christmas tree should please you with its appearance and withstand throughout the holidays.

Particular attention should be paid to the top. According to tradition, this detail serves as a decoration for the crown of the spruce. The top of your tree can be any toy, star, ball or just a curved spiral. A decoration in the form of a symbol of the coming year or an angel will look interesting.

Origami

What can you make a Christmas tree from? The easiest and fastest way to make it is to use paper. In addition, made in miniature sizes, such a craft will become a wonderful New Year's toy.

How you can do this To do this, you will need to prepare in advance all the materials necessary for the work:
- sheets of paper, which can be magazine, book or simply blank;
- stapler;
- scissors;
- glue;
- glitter or spray paint;
- a ribbon or paper clip for hanging the craft on the Christmas tree.

When starting work, all the leaves must be placed in a stack and secured with a stapler. Next, you should draw the outline of the tree with a pencil and cut it out. The next stage of work consists of bending the leaves and painting them with glitter glue or spray paint. The finishing touch is to glue a ribbon or attach a paper clip.

The second manufacturing method is more troublesome. However, the beauty of the resulting craft will certainly delight you. So, for work you will need:
- book pages;
- cardboard;
- glue;
- scissors;
- mini-toys, stars and ribbons for decorating the Christmas tree.

The first stage of work consists of making a cone-shaped base from cardboard. Next, you should put the leaves one on top and make cuts on them, but only on one side. After this, the entire base is glued over. In this case, the uncut side of the paper is placed on the cone. To cover the top you will need to make a “lid”. That's all. The Christmas tree is ready. Now it can be covered with glitter or spray paint.

What can you use to make a Christmas tree for the competition of artificial green beauties? Instead of regular paper, you can use corrugated paper to make a tree. Such material will be a valuable find for the home designer. A Christmas tree made from corrugated paper will look unusual and very beautiful. It will certainly stand out among other crafts.

What can you make a Christmas tree from? The basis of your craft can be not a cardboard cone, but a tube. This piece can be purchased at a hardware store or glued together from a few leftover toilet paper rolls. With this option, the cone is made of colored paper, attached to cardboard with tape. At the end of the work, the top of our Christmas tree will need to be decorated with a bow made of ribbons.

You can use polystyrene foam as the basis for making a New Year's beauty. Strips of paper folded in the form of needles are attached to it.

The Christmas tree can also be made in the form of a panel. For this craft, you will need to cut strips of paper and then roll them into tubes of different lengths. Next, all the parts are glued onto a herringbone-shaped base. The finished product is decorated at your discretion.

What else can you make a Christmas tree out of? From toilet paper. This option for making a New Year's beauty is the simplest and most economical. At the initial stage of work, a cone is constructed, the material for which is white cardboard. The dimensions of this part can be different and depend on the desired height of the final product. Next, take toilet paper. It should not have tear strips, that is, the cheapest option will do. Toilet paper should be folded lengthwise, and then, after gathering it, stick it on the cone from the base to the top, like an American skirt.

The strip should remain intact. The resulting Christmas tree should be decorated with green gouache. At this stage, you can involve children in the work.

What can you use to make a Christmas tree toy made from such thin material? From the same toilet paper. A piece of it should be rolled into a ball, coated with PVA glue, decorated and glued to the Christmas tree.

Crafts from pine cones

In order to bring joy to your family and friends, what can you do for the New Year? Christmas tree made of pine cones. For many, working with this natural material will be a real pleasure.

They are considered to be one of the most beautiful. In addition, this is one of the best options for those who are thinking about the following question: “What can you use to make a Christmas tree for the homemade New Year’s tree competition?”

There are several options. The easiest and simplest of them involves creating a cone of the required size and gluing cones onto it. Work should start from the bottom, gradually moving to the top of the cone. What kind of toys can be made for the Christmas tree from pine cones? The finished craft is painted or decorated with bows, candies, toys, tinsel, etc.

What can you make a Christmas tree from (see photo below)? The second method of making a New Year's beauty involves using not whole cones, but their scales.

The basis of such a Christmas tree will be the same cardboard cone. Scales of cones are glued to it from the bottom in a circle, which will play the role of needles. At the final stage of work, the Christmas tree is coated with green, silver or gold paint. As an additional decoration, glitter is glued to the tips of the needles.

The basis for a Christmas tree made of cones can be a cone cut out of polystyrene foam. It will need to be painted some dark color. For the craft you will also need wire.

One end of it is wrapped around the tail of the cones, and the other is straightened. After the required number of such blanks has been made, they will need to be attached to the base. To do this, the free end of the wire is inserted into the foam.

Autumn version

What can you make a Christmas tree out of for the New Year? From dry leaves. To do this, the material prepared in the fall is glued to a paper cone, creating a wonderful tree. Such a tree will be made from twigs of walnut and cherry, holly and salal, ruscus, etc. Bay leaves are also suitable as green material.

There are two ways to make such a Christmas tree. The first of them involves gluing the leaves to a cardboard cone created in the required dimensions. The crown of such a tree is formed from top to bottom. In this case, the leaves are glued on top of each other.

The next method of making an “autumn” Christmas tree is somewhat more complicated. At the first stage, a base is made in the form of an ordinary cone made of cardboard. Next, holes are pierced at the ends of the branches with leaves, through which a fishing line or thin twine is pulled. This creates a kind of garland. This part is wrapped around a cone, pre-lubricated with glue.

New Year's beauty made from pasta

What other Christmas tree can you make with your own hands? A New Year's tree made from pasta will look very original. It's not difficult to make. In addition, today pasta is sold in different sizes and shapes, which will make your Christmas tree simply fantastic.

The first stage of work is to make a cardboard case. The workpiece must be painted in the desired color. For this, acrylic paint, spray or gouache are used. Next, you should take pasta of different shapes and use PVA glue to glue them to the cone. At the same time, the design of a fabulous spruce should be prompted by your imagination.

Work should be continued until the pasta covers the entire body. After the glue has dried, the finished Christmas tree needs to be painted in two layers.

Tree made of thick fabric

What can you make a Christmas tree from? To create a New Year's beauty, felt is sometimes used. This material holds its shape perfectly and does not crumble. Felt can be used instead of felt. For contrast, it is advisable to take the material in two different colors.

First of all, a cardboard cone is made. Next, circles of various diameters are cut out of felt (from smallest to largest). Christmas tree tinsel is glued to the bottom of the cone with glue or double tape. After this, felt circles are strung onto the tree blank, in which crosswise cuts are first made. The fabric parts fit tightly onto the cone. The top of such a Christmas tree is decorated with a felt cap or tinsel, pre-lubricated with glue.

New Year's beauty made of threads

You can make a “woolen” Christmas tree with your own hands. To do this, you need to charge yourself with a positive attitude and start creating beauty. The first step is to twist a sheet of paper or cardboard into a pyramid, securing it along the contour with glue or tape. Next, take thick woolen threads (necessarily fluffy) and wind them in circles on the base from bottom to top. It is important that the product is neat and even.

The threads should not overlap the adjacent row. For those who make such a Christmas tree for the first time, things may not go well at first. There will definitely be “harmful” threads that will constantly come off. How to get out of this situation? For convenience, the edge of the thread can be attached with a pin. After finishing the work, a conventional garland should be placed on our Christmas tree. It is made from thin threads.

A small pompom will serve as decoration for the top of the New Year's beauty. To make it, you should cut out two circles with a diameter of 3 cm from cardboard, in the center of which there is a 1 cm hole. Threads are wound on the parts folded together. Next, they are cut along the contour and tied in the center.

What kind of Christmas tree toy can be made from threads? It is better to decorate such trees with multi-colored pins. Bright buttons of various diameters can also serve as decoration.

Christmas tree made from plastic bottles

Often you can find unnecessary containers in the house. If these are plastic bottles (preferably green) with a volume of 0.3 to 3 liters, then they can be used to create a New Year tree.

At the first stage of making a New Year's tree, the bottom of our material should be carefully cut off. This can be done using a utility knife or scissors. You will need one largest bottom. It will serve as a support for our product. The rest can be thrown away immediately.

Next, the prepared bottles are cut into strips, the width of which is from 2 to 2.5 cm. The neck must be intact. As a result of these manipulations, you will get a kind of plastic flower.

At the next stage of making the Christmas tree, we cut each strip of the bottle again along the edge every 0.5 mm. These will be our Christmas tree needles. Small cuts will make the New Year's tree fluffier and more beautiful.

Next, the prepared branches should be strung onto the “trunk”. They will use a stick, the length of which should be equal to the intended height of the tree. Blanks from bottles of larger volume should remain at the base, and containers of smaller capacity should be strung to the top. Cover the top of the tree with a plastic lid, hammering a nail into it for security.

New Year's beauty made from cups

What are original Christmas trees made from? New Year's beauty can be made from plastic cups. This material should be green.

At the first stage, eight cups are laid out in a semicircle and fastened together with a stapler. This will be the first row of our product. Next, seven cups are laid out. This is the second row of the tree. The process continues further. Fewer and fewer cups are placed in each row. Next, all the parts are fastened together and fixed with staplers. Collected in a circle and located one above one, they will become our Christmas tree. Next, the New Year's tree should be decorated. To do this, you can put a toy or ball in each cup.

Feather Christmas tree

Anyone who decides to make a New Year's beauty from this material does not need to gut old pillows. Feathers made from them are not suitable for crafts. You can purchase the necessary material only in special stores selling handicraft goods. This will be the first stage of work. Next, you will need to sort the feathers by size and fluff them up a little. This will make it easier to work with them in the future.

When using this lightweight material, the decoration of the product must be done before it is formed. Small plastic beads are suitable for this. They can also be purchased at a craft store.

The beads are carefully glued to the very tips of the feathers. After drying, the resulting blanks are glued from bottom to top onto a cardboard cone. The result is a fluffy one that can be decorated with artificial snow to make it look more like a real Christmas tree.

For stability, a cardboard circle can be glued to the base. A small hole is cut out in the middle, into which a cardboard tube painted brown is inserted.