Production of decorative suspenders for pants as a business. Question to make suspenders for trousers with your own hands - master class Sew women's suspenders with your own hands

Today, suspenders for children have become a necessary accessory for little fashionistas. And that’s why the online magazine “Handmade and Creative” has prepared an entertaining master class on how to sew children’s suspenders with your own hands. Thanks to it, you will save significantly, and you will spend incredibly little time, we think, much less than searching for the necessary suspenders in stores. Using this principle, you can independently create original models of suspenders using leftover fabrics, various accessories, colored elastic bands with unusual beautiful designs. Be creative and look at things with fresh eyes.

Required materials and tools:

• main fabric;
• elastic bands;
• fabric for decoration;
• buttons;
• sewing supplies.

Sew on a sewing machine

For DIY children's suspenders you will need 4 pieces of fabric 6.5x63.5 cm and 2 wide elastic bands. We fold two strips of fabric with the right sides inward, sew along the long sides on a sewing machine, turn them inside out and sew the long sides again. Finish the edges with a zigzag. To attach elastic bands to the main parts of the suspenders, attach two buttons at each end of the two parts, and two buttons at the ends of the elastic. Cross the two parts of the suspenders and sew them crosswise on the machine. Fold the ends of the elastic bands over, insert the fastener and sew the edge with a zigzag. Repeat with the other elastic band.

Inserting buttons

Now bend the other ends of the suspenders up a few centimeters and insert the second parts of the fastener, secure with pins. Now turn it over to the other side and cut it 3-5 cm above the fastener with scissors, zigzag this edge and insert the button. Then, a little above the button, insert two more, as shown in the photo. Repeat these steps with the other brace. See what it should look like.

Making frills

Now take 4 pieces of blue fabric and repeat the first step. Then cut two strips of fabric that are twice the length of the suspenders. Sew a strip down the middle using a sewing machine, pull the thread and gather the folds. Attach each strip to the suspenders between the buttons. Sew them to the suspenders right along the top seam.

Add a bow

DIY children's suspenders are almost ready, all that remains is to add a small detail. Take a strip of bright fabric and fold it in half inside out, sew along the long sides using a machine, and turn the resulting piece outward. Fold the strip into a bow, take a thin strip, wrap it around the seams in the middle of the accordion, and sew by hand. You can decorate one of the suspenders with such a bow or several. Ready!

Self-made trouser braces may not be cheaper than factory ones, but they will certainly be exclusive.

What do you need to make trouser suspenders?

To make suspenders you will need a special elastic band. It comes in different widths, so when purchasing, it is important to take into account the correspondence of this parameter to the set of things with which this accessory is supposed to be used. Children's suspenders require a narrower elastic band than that used in products for adults.

You will need to buy special accessories: 4 pieces of fastenings for trousers and a part that will connect both lines of suspenders on the back. In addition, you will need threads of a color that would be in harmony with the chosen elastic band. If the accessory is for a child, it can be decorated with rhinestones, chains, rivets and other decorative items.

How to make suspenders for trousers?

There are two ways to determine the required length for suspenders. If possible, take a measuring tape and measure the person for whom the product is intended, from the back from the waist line, moving to the right side, over the shoulder to the waist line, moving to the left side. That is, the way suspenders would be worn. Then they cut off a piece of elastic of the length obtained as a result of taking measurements, and trying it on, stretch it so that the person can move comfortably.

The second method is used when it is not possible to obtain the necessary indicators using measurements with a centimeter tape. In this case, you can use something that will give an idea of ​​the distance from the waist to the shoulders of the person for whom the suspenders are being sewn. Having found the desired length, subtract 7.5 cm from it and cut off two pieces of elastic.

The next step is to attach the metal fastenings for the trousers. To do this, each of them is put on an elastic band in turn, its end is wrapped 1.5-2 cm and stitched. The result should be two parts of the same length, each of which is equipped with two fasteners.
Next, the suspenders are laid diagonally in relation to each other so that the place of their intersection is located in the middle of the back.

The location of the elastic bands must be secured with several stitches. Then the suspenders are stitched on a sewing machine at the point where they intersect to form a diamond shape. The thread with which the suspenders were fastened is removed and the finished product is tried on. If desired, it is decorated with various decorative elements.

Trouser braces, made with my own hands, are perhaps elegant details, not only for a man or woman, but for a child's wardrobe. Knowing the sequence and nuances of the work, you can produce it quite quickly; this is a stylish accessory.

Knitting lessons

Question to make trouser suspenders with your own hands - master class

How to DIY trouser suspenders

• How to pattern children's trousers
• How to dye black pants
• How to sew banana pants
• How to determine the size of men's trousers
• Well, sew in your trousers

Your own trouser suspenders will be cheaper than factory ones, but they will certainly be exclusive. What do you need to do to get a trouser brace? To get a facelift, you will need a special elastic band. It is sometimes of different widths, so when purchasing it is important to take into account this parameter; it corresponds to one set along with things if you use this accessory. For children, the facelift is slightly narrower than the one this product is used by adults. You need to get a special use: for trousers, mounting quantities of 4 units and parts to connect two rows of facelift along the back. In addition, you need yarn dyed to match the chosen elastic band. If the accessory is for a woman or child, decorate it with rhinestones, chains, rivets and other decorative items. How to use suspenders for trousers? There may be two ways to determine the required length of elastic band for a facelift. If possible, use a measuring tape and measure the person, for himself, the product intended, on one side, the back line, the waist, moving to the right side, over the shoulder to the waist line, moving to the left side. That is, how it will be, run, squeezing. Then cut a piece of the same length of elastic band, which was obtained from the measurements and worked, it is stretched so that you can move comfortably. The second method is used when it is not possible to obtain the required indicator from a measuring tape. In this case, you can use anything that will give you an idea from the shoulder, waist, face, for which the tightening is sewn. If you find the right length, get them from 7.5 cm and cut two elastic bands. The next step is to attach the metal parts for the trousers. To do this, each of them in turn, on our head, we did not complete it in the last 1.5-2 cm and stitched. In the end, you need to switch to two parts of equal length, each of which also has two fasteners. After tightening, they are placed diagonally opposite each other, so that somewhere at the intersection is located in the middle of the back. Location: Fix the elastic with a few stitches. Then, squeezing the sewing machine at the intersection, where they produce a lot of diamonds. Thread, which garters were removed together rehearsal and produce finished products. If you wish to eden various decorative elements.

WikiHow carefully monitors the work of its editors to ensure that every article meets our high quality standards.

For several centuries now, suspenders have periodically gone in and out of fashion. By supporting the waistband of the trousers, they take on the function of a belt and prevent the trousers from falling down. This article will help you make cross back braces and D-ring braces. Even if they go out of fashion again, they can always be worn under a suit. You will find the process of working on such an easy sewing project a pleasure.

Steps

Part 1

Prepare the necessary materials. Buy about 1.8-3.6m of thick 25mm wide suspender elastic (the exact length depends on your height and weight), two buckles and four special clips. You can find all this in a fabric store. You will also need scissors, tailor's pins, a measuring tape, a sewing machine or a regular needle and thread.

Cut the elastic into two equal parts. The two pieces of elastic for the suspenders should be slightly longer than the required final size, since the length of the straps will be adjusted by the buckles.

• To ensure the elastic isn't too short, measure yourself first. Take the end of the measuring tape and place it at the front of your waist.
• Ask someone to throw the measuring tape over your shoulder and also apply it to your waist, but this time on your back.
• Add 15-30 cm to the resulting measurement to make the suspenders adjustable. You will need two pieces of elastic of exactly this length.

1. Attach both pieces of elastic with one end to the front waistband of your trousers. Hold the ends of the elastic bands at waist level (where they will later be fastened).

   Throw both elastic bands over your shoulders. Have someone help you throw the elastic bands of the straps over your shoulders.

   Cross the elastic bands at the back. Have an assistant place pieces of elastic at the back of your trousers. In this case, the straps on the back should go towards each other in order to cross each other. The resulting cross will be located in the lumbar region.

   • After this visual check, remove the elastic bands from the shoulders and move on to the process of installing buckles and clips.

2. Wrap the end of the elastic around the central bridge of the buckle and sew it closed. Fold the protruding end of the elastic back over the center bridge of the buckle, and then sew it in this position.

   Place the first clip on the same strap. Thread the free end of the strap into the loop of the suspender clip, and then fold it up toward the main length of the elastic. Please note that the clip itself should stick out from the opposite side of the elastic than the one on which you folded and hemmed the first end with the buckle.

   Pass the free end of the strap through the buckle. Take the free end of the elastic and thread it through the buckle. First, move it from bottom to top, and then from top to bottom and pull it out.

   • This will give you an adjustable front end of the strap.

3. Place the second clip on the free end of the strap. Insert the still free end of the elastic into the hole of the second clip and tuck it under. Note that the clip should be on the front side of the suspender strap, and the elastic fold should be on the back side.

   Secure the end of the elastic with a pin. Take a tailor's pin and use it to pin the elastic hem. The pin will hold the elastic in place while you sew it up.

   Sew the folded end of the elastic. Use a sewing machine or regular needle and thread to sew up the other end of the strap. Be sure to backtack at the very beginning and end of your stitching, as your stitches will hold the clip to the strap.

   Repeat the procedure with the second strap. Repeat the same procedure with the remaining strap, buckle and clips. You now have two completed suspender straps.

Part 3

Attach the rear strap clips to the waistband of your trousers. Wear pants that fit well. Fasten the back clips of both straps to the waistband of your trousers.

Cross the straps. Throw the straps over your shoulders, crossing them over your back.

Attach the front clips of the suspenders to your trousers. Pull the loose ends of the straps hanging from your shoulders to your belt. Fasten the front clips of your pants to the front of your pants.

Pin the straps on the back where they cross. Have an assistant use a pin to pin the straps of the suspenders crossed at the back. The pin will fix the location of the crosspiece that needs to be stitched.

Sew the cross of the suspenders. First, unfasten all the clips and remove the suspenders. Use a sewing machine or a simple needle and thread to sew a diamond-shaped chain of stitches at the point where the straps cross to secure the crosspiece. Each side of this diamond will contain approximately five stitches.

Part 4

Gather the necessary materials. For suspenders whose straps meet at the back in a D-ring or even a regular ring, you will need the following: 1.8-3.6 m of thick elastic band for suspenders 25 mm wide (this all depends on your height and weight), one D-ring or a round ring, three special clips, a needle, thread and scissors. Almost everything you need can be purchased in the sewing accessories department of a fabric store. If the fabric store doesn't have D-rings or regular rings, you can look for them at the hardware store.

Lengthening or shortening your trouser suspenders is very easy!

There is such a story.
During the construction of St. Petersburg, Peter the Great lost a lot of weight. So much so that his pants began to simply fall off.

After several unsuccessful attempts to tie them with a rope, he ordered his courtiers to stretch this rope over their shoulders and fasten them with copper buttons sewn onto the front of their trousers. This is how the first suspenders were born.

I have no right to judge how reliable this story is, but what trouser suspenders are a useful thing, I agree one hundred percent!

I am convinced of this every time I dress my son with. Any pants dressed without suspenders(especially the classic cut) do not fit his “skinny” body.

But recently I encountered this difficulty: it became impossible to choose children’s braces for my much older son - they are all small, and adult braces, not only are they 2-3 times more expensive than children’s, but they are also large. What to do?

As usual, ingenuity came to the rescue. I decided to remake the small size children's suspenders (already in stock) by increasing their length. This can be done in 15 minutes. So.

1. First I found a regular elastic band, suitable width (with color, I didn’t experiment too much - black goes well with gray).

2. Measured my son, finding out the desired middle back part of the suspenders.

3. I tore off the old one(short) middle part, cut off the clip.

4. Threading into the prepared clamp a piece of elastic, stitched it along a short cut.

5. Then I sewed in the upper part of the elastic into the connecting piece of the suspenders, stitching along the existing lines. All is ready!

The photo shows the difference between the length of the middle part of the suspenders, so to speak, with the naked eye.

By the way, according to the same principle you can sew new suspenders yourself using applied materials from old suspenders or buying all the accessories in the store. Fortunately, in stores you can now buy various types of colored elastic bands, with unusual and beautiful designs.

Believe me, the savings are significant, and you will spend incredibly little time (I think much less than searching for the suspenders you need in stores). Moreover, Nowadays, suspenders not only serve to support trousers, but are also a stylish accessory.. Imagine and look at old things with a “fresh” look.

With wishes of good luck, Elena Krasovskaya