Make an owl from pine bark. DIY crafts from pine cones: master class with step-by-step photos. Owls made of cones and cotton wool

01.04.2024 -

Roll two identical balls from colored plasticine, and then crush them into round pancakes of the same size. These will be the eyes for your owl. Attach them to the fir cone so that they are almost right next to each other. Make two sticks from plasticine of a different color and glue them vertically in the middle of the pancakes. These are the pupils.

Using your fingers, roll two round craft ears and two teardrop-shaped wings. Make the beak into a triangle and attach it right next to the eyes. Form two paws using a special knife, cutting each plasticine cake into three parts and sharpening the ends with your fingers so that it looks like claws.

Another version of a simple owl can be made from two cones. The small bump will be the owl's head, and the larger one will be the body. Cut out the owl's ears, wings and beak from thick paper and place on the pine cone, smearing them with a drop of glue. Sculpt the paws from plasticine.
Secure the two cones together.

Various details for the owl can be cut out not only from paper, but also from pieces of felt.

Fluffy owl

To make a fluffy owl, select pine cones that have the most exposed scales. Divide the ball of cotton wool into separate small pieces. Use a brush with PVA glue to coat the inner parts of the pine cone and fill them with cotton wool. Don't pack it in tightly. You can separately fill with cotton only those parts where the owl’s chest and head are located.

For your second furry owl, you'll need a feather boa. Wrap the large open pine cone completely around the boa, tucking it tightly into the gaps that form the scales.

The owls will look even more interesting if you paint the pine cones with acrylic paint or gouache before starting work.

Cut two circles from a piece of cardboard. Draw pupils for the bird on them with black paint. Glue the resulting eyes to the fluffy blanks. You can use acorn caps to make owl eyes. Draw pupils on their convex side and attach them to the bird.

Ready-made plastic eyes with moving pupils can be purchased at craft stores.

Cut out the owl's beak from a piece of cardboard. Paint the resulting triangle with dark brown paint and bend it in height. Glue the beak with clear glue.

Improvise with the decoration of your craft. You can make a headdress for the owl. From

An owl made from pine cones is always a win-win option for crafts made from natural materials dedicated to autumn events. The owl looks catchy and presentable, causing affection in everyone around him, and especially in children.

What will you need for the craft?

Pine cones;
Two spruce;
1 acorn and two acorn caps;
Glue gun;
Toilet paper, water, container for preparing papier-mâché;
PVA glue;
Moving eyes, but this is not necessary.

Big owl made of pine cones step by step

The work can be roughly divided into two parts: preparing the frame of the owl, which will be papier-mâché, and directly creating the owl from pine cones. If you don’t want to mess with papier-mâché, you can use plastic dishes instead: a cup of sour cream, yogurt, a small bucket, etc.

How to make papier-mâché?

Depending on the desired size of the owl, you need to place PVA glue in the container.

Add water to it in a 1:1 ratio and stir until the glue dissolves. I have a medium-sized owl, 15 cm high. I needed about 2 tablespoons of PVA glue.

Mix well to obtain a relatively homogeneous mass.

And then everything is simple - dry toilet paper needs to be crumpled up a little with wet hands, giving it some shape similar to the body of a bird, that is, an oval with a tail. It may be small, not even larger than an ordinary cone; subsequently, glued cones will significantly increase the volume.

And apply a thin layer of adhesive on top. Ideally, papier-mâché layouts are carefully smoothed, but we don’t need this, there will still be bumps on top.

In exactly the same way you need to make a ball out of paper - the future head of an owl. You can make a whole part at once, but, in my opinion, it’s more convenient and simpler to do it separately.

After this, the product should be dried in the oven at 60 degrees for about 3 hours. Periodically you need to open the oven and turn the pieces over. But, to be honest, I didn’t have the patience to wait that long; after the parts were in the oven for about half an hour, I put them in the microwave. In 6 approaches of 30 seconds, the owl’s body and head were ready. They became dry, whole and light.

How to make an owl from pine cones?

The base of the owl is ready, now you need to glue the cones onto it. I used a glue gun, but maybe Moment glue will glue the pine cones to the paper, but I can’t say for sure. But when working with cones and plastic, there are no options, only a glue gun.

Heat the device for 5 minutes, squeeze out a large pea of glue onto the side of the pine cone and glue it to the lower part of the body with papier-mâché. This is how the first bottom row is secured. You can start with the tail so that the bump falls right on its tip.

They do the same thing with the second row. The cones need to be selected in size so that they hide the papier-mâché well, but do not puff up unevenly.

The body is almost finished, it's time to glue the head to it and continue working.

The bumps on the head look ugly on their sides, so I glued them with the flat part. I covered my entire head with cones, trying to make it more or less symmetrical.

While the design still bears little resemblance to an owl, the protruding ears, which I have small unopened cones, will give it a resemblance to it. You will also need wings made from fir cones, eyes made from acorn caps, and a nose – the acorn itself.

The result was this rather large owl made from pine cones, made entirely of natural materials, except for the paper base. But still, I wanted to glue moving eyes inside the caps of the acorns, which significantly enliven the appearance of the owl. You can also decorate the owl with leaves, for example, a coquettishly protruding dried twig.

Another good option for autumn crafts is.

Owls are popular birds. Wise, cute - children will like them too. Especially if you make unusual owls with your own hands from everything that comes to hand - from pieces of wood, pine cones, file folders...

"Owl" panel

You will need:

- board for background;
- narrow pieces of bark;
- pine cones of different diameters (2 large, 2 small);
- sanding paper;
- jigsaw;
- colored paper (velvet, cardboard), buttons or eyes, chenille wire (brown, black);
— decorative details (moss, spruce branches, thuja);
- hammer;
- shoe nails;
- hot glue gun.

Strip the bark from the back side, removing the soft base.

Pre-place pieces of bark around the perimeter of the board to choose the most successful combination. Secure the bark pieces with nails or hot glue.

Select cones of different diameters - the body and the head. Use a jigsaw to saw off the halves of the cones and leave only the bottoms. Lightly press the scales so that the buds become flat.

Connect the big chic to the small one by interlocking them with scales and securing them with hot glue.

Create a “face”. Place all parts on hot glue.

Place the owls on the background board. Decorate the frame with moss, thuja and spruce branches to create a forest texture.

If the panel will hang on the wall, you need to fasten a loop on the back of the board for a nail.

Owl from file and leaves

You will need:

- file;
— dry leaves or other “soft” parts of plants;
- colored paper (preferably velvet);
- twine;
- scissors;
- glue gun (or any other glue).

Cut off the part of the file that is intended for fastening in a folder. Be sure to leave some of the border so that the file is still airtight.

Prepare the details: eyes (a large orange oval and a smaller black one, 2 pieces each), as well as large paws and a beak. Create a “face” before you start filling out the file. Place the eyes at a height of 2/3 from the bottom.

Pack the file tightly with dry grass, leaves, hop cones, or any other soft material you have on hand. Make sure that there are no sharp or hard parts in the material that could tear the file.

When filling the owl, be careful with the cut side - this is the weak point of the craft.

Once the file is full, tie the top ends to form the owl's ears. Place the edges of the file on the open side one under the other so that the top of the owl's head is tightly closed. Glue the paws. First select a place so that the center of gravity falls on them, then the owl will be stable.

If you fill the owl with aromatic medicinal herbs or onion peels and make small holes on the back of the craft (with a hot needle or a hole punch), you will get an accessory that is good for health. The aromatherapy owl can be placed on your child's desk or near his crib.

Polar owls made of cones and cotton wool

You will need:

- well-dried, opened pine cones;
- cotton wool;
- feathers;
- cotton pads;
- colored paper (preferably velvet or cardboard);
- small black buttons;
- a small piece of drape, felt;
- scissors;
- hot glue gun.

Separate the “threads” from the cotton ball and wrap them around the bump. Distribute the material evenly so that the tips of the scales are visible and the depressions are covered with cotton wool.

Instead of wings, use rough feathers. Give them the desired shape and length. Glue using hot glue.

Make the “faces” of the owls from cotton pads. Cut off all excess: round the chin, cut a triangle on the top of the head to create “ears”. Cut out the beak from felt or drape.

The eyes can be made of paper, and buttons can be used instead of pupils. Fasten the parts with hot glue. Instead of ears, also glue feathers, in this case pointed and thin.

Try the “face” on the bump, then pour glue onto the bump and glue the cotton pad. Hold your head until the glue hardens.

Owls made from logs and wooden rounds

You will need:

- a pair of logs with even cuts, about 8-12 cm high, about 4.5-5 cm in diameter;
- roundels of different diameters (large about 6.5-7 cm; medium about 4.5 cm; small about 3 cm);
- thin branches about 6 cm long;
- felt or drape 15 cm long, 3 cm wide;
- pieces of bark about 5 cm wide, about 10 cm long;
- hammer;
- shoe nails;
- pruning shears;
- white and black gouache, brush;
- PVA glue;
- saw;
- hot glue gun;
- grindstone.

A sharpening stone is needed to polish round pieces. The surfaces of the head and eyes should be smooth.

For one owl goes:

- 1 log (torso);
- 1 large round (head);
- 2 medium and 2 small round eyes (eyes);
- a pair of coarse feathers, several thin branches of the same length (ears);
- 1 felt triangle (beak);
- 2 pieces of bark in the shape of an oval (wings).

Pre-paint the middle circles (whites of the eyes) white. To make the gouache stick, mix it with PVA glue (in a separate bowl) and apply it in a thick layer. Repeat if necessary after drying. The same thing with the pupils. Also color the sides of the pupils. Dry the parts well and glue with hot glue.

Use pruning shears to cut thin branches. Trim the tips of the feathers so that they split into two and look like owl ears. Glue feathers and branches to the back of the whites of the eyes, forming owl ears.

Glue the finished eyes to the “face” and place the “face” on the body. To prevent it from tipping forward, place a thin branch under the chin.

The wings need to be trimmed, giving them the shape of pointed ovals. Scrub the inside of the wings thoroughly, removing the soft parts. The wings can be attached to nails or hot glue. Position them slightly in front.

Owls made of cones and threads

You will need:

- Pine cones;
- thick multi-colored yarn;
- felt or drape;
- feathers;
- halves of walnuts;
- colored paper (velvet, cardboard);
- chenille wire (black, brown);
- black small buttons;
- pumpkin seed (or a cardboard piece of the same shape);
- scissors;
- hot glue gun.

Wrap the pine cones in random order with coarse wool. Try not to let the threads go too deep. Secure the ends of the threads with hot glue.

From felt, cut out a double-sided pointed oval - the “face” of an owl. Make eyes from paper, pupils from buttons. Glue the beak and eyes to the “face”. Secure the ears with glue on the back side.

Apply large drops of glue to the walnut halves and plant the future wings in the place where the “shoulders” should be.

Glue the paws formed from wire on the bottom. Chenille wire can be replaced with thin branches.

How to keep your child occupied when the weather outside is inclement? Of course, handicrafts! One of the simplest options is to make crafts from waste material, which is easy to find. Pine cones are a great solution. Finding them is easy, and working with pine cones is a real pleasure.

We offer an easy-to-follow master class on how to make a funny owl, which can become not only a decoration for a shelf above the fireplace, but also an interesting toy for your child. And to make the creative process even more exciting, you can introduce an element of competition: the mother decorates the owl with cotton wool, and the child with feathers. If there are several children in the family, then a fun time is guaranteed!

We will need:

Pine cones;
cotton wool;
glue;
felt;
feather boa;
plastic eyes.

Interesting ideas

The owls will look more original if the cones are painted before decorating. We glue on eyes made from painted acorn caps, and instead of wings we attach two fluffy feathers.

But a craft made from a fir cone can look like this: thin twigs will serve as the ears, a piece of brown cardboard will serve as the beak, and the head and breast will be covered with cotton wool.

You can create a funny owl professor if you decorate a pine cone with parts cut out of thick felt.

Well, if you have plenty of pine cones, as well as free time, then you can aim for a large craft. Of course, creating a large owl from pine cones requires patience, skills, additional tools and materials, but the result will surprise everyone!

Spend your time interestingly, usefully and with pleasure!

A walk in the forest can bring you not only the joy of enjoying clean air and greenery, but also the benefit of collecting natural materials for crafts. After all, even if you don’t plan to engage in creativity, you often have to make crafts for school or kindergarten.

Also, in late autumn or winter there is such weather that it is not possible to go out for a walk, so you can easily get your child interested in working with pine cones or leaves together. Children like to create something that is familiar to them; most often, an animal or bird is a safe bet.

This owl can be used as a Christmas tree decoration, or just a figurine.

Necessary materials:

Cone
Acorn caps
Hot gun
2 feathers
Dye

To make the owl bright and similar, the acorn caps can be painted with white paint, and black dots – pupils – can be made in the center.

You can also paint the cone itself with yellow paint.

You can clean the cones first so that the paint adheres better. This can be done with baking soda and a toothbrush.

You can also dry the buds in the oven. To do this, first rinse them in water and then put them in the oven for 20 minutes at 250 degrees. This will keep the buds clean and germ-free.

How to make an owl from fir cones step by step

Fir cones are more attractive because they have a more elongated shape, and some crafts will look much more interesting this way.

We will need:

fir cone
Cardboard (brown, orange, yellow, black)
Hot glue
Acrylic paint (orange/tan)
Brush

Use these templates for your work

1. The cone can be painted a little with a brush or sponge. Leave to dry.

2. Make blanks according to templates on colored cardboard.

3. According to the photo, assemble all the cardboard pieces together using glue

4. Glue owl elements to the pine cone

A master class on an owl made from pine cones and felt can be seen in another article, where you will also find many interesting crafts made from natural materials.