DIY angel wings: materials, techniques, ideas for inspiration, master class, videos for beginners and experienced craftsmen. How to make Winx fairy wings with your own hands? How to make wings out of paper with your own hands How to make angel wings with your own hands

Recently, artificial wings have become a very, very relevant topic for photographic shooting. You can easily find on the Internet wonderful ideas for photo shoots with wings made from dried flowers or maple leaves. Well, the most aesthetic, the most beautiful are, of course, white wings, like those of an angel. If you have the finances to do so, then it would be ideal to purchase large, goose feathers. Depending on their size, we select the shape. You can create wings of different birds, or even wings like a bat.

In addition to thematic photo shoots, wings can become part of a child’s costume for a masquerade or simply please the little Princess by complementing her elegant dress.

Advice

To ensure that this solution involves a minimum of expenses, it is best to make the wings yourself. Moreover, there is absolutely nothing complicated about it.

We select the required shape, as well as the dimensions for the wings. After this, we transfer the shape of the required size to the base. The base must be strong and hold its shape so that your wings do not subsequently bend or sag like two rags.

White cardboard

For this you can take, for example, white beer cardboard. However, since it is covered with feathers, its color does not matter much. You can also use cardboard from an appliance box. You will need 2 absolutely symmetrical parts. They will become wings. True, if these are wings for a small child, then it is possible to cut out one, single shape. You will also need a lot of paper feathers to cover 2 sides of each wing.

The feathers should be cut into three sizes and arranged sequentially in three rows. And from the scraps you can cut out the smallest feathers; ultimately, they will need to be used to lay out the edges of the feathers and cover the glimpses at the base. All feathers need to be bent in order to give the wings volume and realism. It is also good to cut feathers from whatman paper, although almost any paper can be used. For greater realism, you can combine paper and fabric. We start laying the feathers from the edge, but so that they overlap the previous one. The fastest, and at the same time effective, bonding method is hot melt glue. As soon as your first row is ready, start laying the second, although you can glue it through one. After the second there is a third row. Tiny feathers cut from scraps cover the remaining free spaces. The top of the wings is laid in exactly the same way, in the direction of feather growth. The same thing is done on the other side.

Rubber

To secure the wings you will need a wide elastic band. You will need to make special straps for the arms. For greater structural strength, it would be good to make a hole in the base and secure the elastic on both sides. The attachment points are masked with feathers to make the feathers look “alive.” It is necessary to carefully fasten the parts together, additionally glue them with paper for strength and cover them with feathers for beauty. Be sure to calculate at what width and height the straps should be made.

Important!!!

You can create wings from thick cardboard, and then cover them with cotton wool and, if desired, decorate them with sparkles. This design will require caution in use, but it is very impressive in appearance.

Flying, paper wing

A flying wing made of paper floats beautifully in the air and is relatively easy to make. To do this, take an A4 sheet of paper and simply bend the corners towards the center. They need to be folded down twice. Then you need to fold the flying wing in half and make folds along the lines, after which you need to bend the wings both in front and behind. Thus, your paper flying wing is already ready. You need to start it gently, applying little force. Alternatively, something similar can also be done using the origami technique. True, this is technically somewhat more difficult and will require skill. However, the result is certainly worth it.

Conclusion:

Wings can be made from thick paper, taken as a basis. And anything can become decor - fabric, feathers and even cotton wool. You can also create a flying wing or a specific tailless airplane from paper using the origami technique. Such toys delight boys.

Paper angel wings

How to make wings

DIY angel wings

If you are preparing a theatrical production with a Christmas theme, you may need to make an angel costume. It’s easy to find a costume for a stylized, modern or Catholic angel on the Internet, but if you need an Orthodox angel, then it must have a long, floor-length, white or silver surplice. Such a robe, reminiscent of a dress or robe, is easy to make yourself.

Sleeves should be long and loose. The wings can also be made from three cardboard elements covered with silver paper.

On her feet, the angel can wear white sandals with thin straps, or white neutral shoes. You need to curl your hair a little, or use a light golden wig.

How to make wings for a costume

The fastest and most affordable way to make small wings is to use thick white paper. Simply cut out the wings according to the template, make rounded slits in them and bend them back to get a feathery effect.

Their disposable paper plates can also be used to make wings for a little angel. We attach strip pieces from other similar plates to the base plate, fix the straps from the ribbons, cover them from the inside with another plate, and we get ready-made wings. The fluted edges of the plate create the effect of feathers, so these wings are perfect for an angel costume.

If paper wings seem too simple to you, then you can drape them with feathers or pieces of light transparent fabric.

Wings made of translucent fabric (in extreme cases, even gauze will do) on a wire frame, decorated with edges along the contour, look even more advantageous. Apply a feather design to the fabric using silver paint. Don't forget about the straps!

If you are a patient person, then you can cut small pieces of thin cardboard in the form of feathers and stick them on a thick base from the bottom up, like scales, overlapping. It is better not to glue the bottom of the feather, but to slightly bend it to give the plumage an additional play of light. In the center of each feather, until the glue has dried, you can press a line with a blunt knife or the stem of a brush. This will give the wings even more convincing.

To be the center of attention at a costume party and catch admiring glances, you need a chic suit. An excellent option would be the image of an angel with large beautiful wings. These wings are often used for photo shoots. You can also dress up your child in a little angel costume for a festive party in kindergarten. This article contains templates for angel wings and several master classes on how to make angel wings with your own hands.

Templates and materials

Such a beautiful detail of the image of an angel can be made from all kinds of available materials. The base for them is most often made of cardboard. The cardboard is then decorated with materials that look like feathers. Elastic bands are attached to the back of the wings to make it easy to put on the shoulders.

Another base option is a rigid wire frame. It is bent into the desired shape and covered with elastic fabric. Then the base is also decorated.

By using your imagination, you can come up with an original decor for the base. The main thing is that the weight of such wings is not too heavy.

Templates can be simple in shape. The main emphasis is on the feathers themselves.

Or a multilayer openwork template is cut out, the shape of which looks like almost finished wings.

The most natural decoration is, of course, feathers. You can buy a boa and glue feathers from it to the template.

In feather pillows, you can choose light feathers, grease the template with glue and pour feathers onto it. They will stick well and quickly.

You can also ask people who keep pigeons, but they are unlikely to have the required number.

Therefore, they make imitation feathers from satin fabric, paper, tracing paper, cardboard, fabric ruffles, napkins and other available materials.

Feather wings

Let's create a classic version of feather wings for an angel costume. These wings are perfect for a small child.

To make wings, you need to prepare plastic, a piece of chintz, transparent glue, feathers, and elastic bands.

Cut out a template of wings from plastic binders. We glue chintz, also cut according to the template, onto the plastic. You can make a frame from wire and glue chintz parts onto it. The effect will be the same. We make two holes at the base and insert elastic bands. Before making holes, you need to attach the wings to the back and mark the location of the holes.

We cover the edges of the wings with feathers so that the wire frame is not visible.

We sort the feathers by length and glue them in rows from bottom to top, from long to short.

We cover the edges at the top with down feathers.

The results are very realistic wings.

Making from fabric

Wonderful wings are made from fabric ruffles.

Let's prepare cardboard, paper for gluing the back side of the wings, elastic bands for fastening, glue and circles of fabric, tape for connecting the wings.

Cut out a template from cardboard.

Using the template, we cut out the parts from paper with a margin around the edge.

Cover the cardboard with paper. We make holes and insert elastic bands.

We take circles of fabric in the center to form soft, uniform folds.

Starting from the bottom, glue the fabric to the cardboard base.

The result is fluffy wings.

We fasten them with ribbon, and the fabric angel wings are ready.

Another master class on fabric wings. Light and airy wings are made from organza.

To make them you will need rigid wire, nylon or tulle, organza, scissors, thread, and a needle.

The frame is made from wire.

The frame is covered with tulle or nylon mesh. We fasten the parts with wire, which we also glue. We put wide elastic bands on the connection that will be worn on the shoulders.

Strips are cut from organza, and fringe is cut from one edge. The strip is folded and sewn to the frame, starting from the bottom.

The result is delicate airy wings.

Paper product

Huge angel wings can be decorated with paper feathers.

To work, we need to prepare simple cardboard for the base, paper, nightlights, glue and elastic bands.

The template is cut out to the desired size and transferred to thick cardboard.

The diagram shows the principle of gluing feathers of different sizes.

We cut out a lot of feathers and bend them lengthwise.

Glue the feathers in rows.

We make two holes on each wing. We insert an elastic band into them. We mask the holes with feathers.

We fasten the wings. We also mask the junction.

When finished they will look like this.

Napkin wings

Angel wings decorated with napkins are tender and airy.

To create them you need ceiling tiles. It can be replaced with cardboard covered with paper. We will also prepare white napkins, scissors, an awl, elastic bands, and glue.

We cut out the wings according to the template. We make holes in them for attaching rubber bands.

We thread elastic bands through the holes.

Fold white napkins like an accordion. Cut out the feather.

We unfold the napkin and get several feathers.

Glue the feathers from bottom to top, overlapping the top row with the bottom.

After all the feathers are glued, the tips of the feathers are slightly deformed. We do it carefully so as not to damage them. This will give the wings a natural look.

You get such wonderful fluffy angel wings.

Video on the topic of the article

In this selection of videos you can get inspiration and learn how to make angel wings in different ways.

An angel costume usually consists of three main parts: a white dress for a girl (or a long white shirt for a boy), a halo and snow-white wings on the back. This outfit can be worn for Halloween or New Year's masquerade. But not everyone knows how to make an angel costume with their own hands.

Let's look at several options, and you, based on the materials you have, will choose how to sew an angel costume for your favorite angel.

Feather wings

So that your child can go to a New Year's party or Halloween as a real angel, make him wings from real feathers. You can borrow them from any poultry farm or from your grandmother in the village.

We will need:

• copper wire in insulating braid – 3 m;
• template cut from newspaper;
• thin thick cardboard;
• Any white fabric, but knitwear is better - 0.5 m;
• glue "Moment";
• large white duck or chicken feathers;
• downy feathers;
• down boa or rabbit fur;
• double-sided tape and regular tape;
• scissors, pliers.

Work order

1. Use pliers to bend the wire around the perimeter of the template. Start at the base of the wing. Then you can use the remaining ends to attach the wings to the back.
2. We cut out two wings from cardboard according to the template and attach them inside the wire frame using tape. Then we glue the white fabric cut out according to the same template with a hem allowance of 1 cm (4 blanks) on both sides.
3. We glue down feathers around the perimeter, masking the wire frame.
4. Glue the largest feathers in rows. They have smaller feathers.
5. We decorate the top of the wings with down, covering the tips of the top row of feathers. Glue the boa. If you have pieces of white rabbit fur lying around, consider it its time. The wings are ready. Don't forget to sew on two straps so that the entire structure can be worn on your back, like a backpack.

Foil wings

With these shiny silver wings you will conquer the entire Halloween season. For feathers, you can take ordinary tetra bags made of milk, juice or wine, metallized on the inside.

1. To cut a feather, you need to fold the blank in half and cut out a crescent.
2. Without unfolding, make a fringe.
3. Cut out two wings from thick cardboard and cover them with “silver” feathers on both sides, starting from the bottom.
4. Fasten the wings together with wire and attach it to your boy’s back.

Very simple

I want to amaze my friends on Halloween, but not everyone can collect so much foil, especially since not everyone has access to duck and chicken farms. Now you will learn how to make an angel costume from... cardboard disposable plates. You will have time to make this costume even if Halloween starts in two hours. It is clear that for this we will need a lot of paper plates.

1. Set aside three plates and draw two symmetrical arcs on the rest. Cut the plate along these lines. Throw away the middle, the two outer crescents will be our feathers.
2. Divide the “feathers” into two equal piles and fold them into two fans as shown in the photo, securing them with glue along the edges of the plate.
3. To hide the unsightly ends, glue a second plate on top of them.
4. Glue two straps and hide their ends under the third plate.

Easy angel wings for your girl are ready, and she can wear them to Halloween.

Angel Costume Patterns

An angel can go to Halloween in any suitable dress, even a nightgown. But if he doesn’t have such “angelic” clothes in his wardrobe, we suggest sewing a dress using the simplest patterns.

Since angels come in different sizes, the pattern is given conditionally. You can, for example, calculate the scale based on the chest circumference and draw patterns. With a fabric width of 80-110 cm, you can calculate how much fabric is needed: 2 front lengths + sleeve length. With a width of 120 cm: front length + sleeve length. With a fabric width of 140 cm, one length of the dress will be enough for you, and the sleeves are cut out from the remaining width.

Nimbus

Well, what is an angel without a halo?! It is very easy and simple to make from copper wire. We also need a regular hairband.

1. Make the halo itself first. Roll it from the wire, leaving the two ends hanging on opposite sides. Decorate it with white fluff if you are going to Halloween, or with tinsel if you have a New Year's party ahead.
2. Attach the two ends of the wire to the hoop and disguise them with white tape. So the costume for your little angel is ready.

To be the center of attention at a costume party and catch admiring glances, you need a chic suit. An excellent option would be the image of an angel with large beautiful wings. These wings are often used for photo shoots. You can also dress up your child in a little angel costume for a festive party in kindergarten. This article contains templates for angel wings and several master classes on how to make angel wings with your own hands.

Templates and materials

Such a beautiful detail of the image of an angel can be made from all kinds of available materials. The base for them is most often made of cardboard. The cardboard is then decorated with materials that look like feathers. Elastic bands are attached to the back of the wings to make it easy to put on the shoulders.

Another base option is a rigid wire frame. It is bent into the desired shape and covered with elastic fabric. Then the base is also decorated.

By using your imagination, you can come up with an original decor for the base. The main thing is that the weight of such wings is not too heavy.

Templates can be simple in shape. The main emphasis is on the feathers themselves.

Or a multilayer openwork template is cut out, the shape of which looks like almost finished wings.

The most natural decoration is, of course, feathers. You can buy a boa and glue feathers from it to the template.

In feather pillows, you can choose light feathers, grease the template with glue and pour feathers onto it. They will stick well and quickly.

You can also ask people who keep pigeons, but they are unlikely to have the required number.

Therefore, they make imitation feathers from satin fabric, paper, tracing paper, cardboard, fabric ruffles, napkins and other available materials.

Feather wings

Let's create a classic version of feather wings for an angel costume. These wings are perfect for a small child.

To make wings, you need to prepare plastic, a piece of chintz, transparent glue, feathers, and elastic bands.

Cut out a template of wings from plastic binders. We glue chintz, also cut according to the template, onto the plastic. You can make a frame from wire and glue chintz parts onto it. The effect will be the same. We make two holes at the base and insert elastic bands. Before making holes, you need to attach the wings to the back and mark the location of the holes.

We cover the edges of the wings with feathers so that the wire frame is not visible.

We sort the feathers by length and glue them in rows from bottom to top, from long to short.

We cover the edges at the top with down feathers.

The results are very realistic wings.

Making from fabric

Wonderful wings are made from fabric ruffles.

Let's prepare cardboard, paper for gluing the back side of the wings, elastic bands for fastening, glue and circles of fabric, tape for connecting the wings.

Cut out a template from cardboard.

Using the template, we cut out the parts from paper with a margin around the edge.

Cover the cardboard with paper. We make holes and insert elastic bands.

We take circles of fabric in the center to form soft, uniform folds.

Starting from the bottom, glue the fabric to the cardboard base.

The result is fluffy wings.

We fasten them with ribbon, and the fabric angel wings are ready.

Another master class on fabric wings. Light and airy wings are made from organza.

To make them you will need rigid wire, nylon or tulle, organza, scissors, thread, and a needle.

The frame is made from wire.

The frame is covered with tulle or nylon mesh. We fasten the parts with wire, which we also glue. We put wide elastic bands on the connection that will be worn on the shoulders.

Strips are cut from organza, and fringe is cut from one edge. The strip is folded and sewn to the frame, starting from the bottom.

The result is delicate airy wings.

Paper product

Huge angel wings can be decorated with paper feathers.

To work, we need to prepare simple cardboard for the base, paper, nightlights, glue and elastic bands.

The template is cut out to the desired size and transferred to thick cardboard.

The diagram shows the principle of gluing feathers of different sizes.

We cut out a lot of feathers and bend them lengthwise.

Glue the feathers in rows.

We make two holes on each wing. We insert an elastic band into them. We mask the holes with feathers.

We fasten the wings. We also mask the junction.

When finished they will look like this.

Napkin wings

Angel wings decorated with napkins are tender and airy.

To create them you need ceiling tiles. It can be replaced with cardboard covered with paper. We will also prepare white napkins, scissors, an awl, elastic bands, and glue.

We cut out the wings according to the template. We make holes in them for attaching rubber bands.