Crochet children's hats patterns and descriptions. Crocheted hats for girls. Variants of models and knitting patterns. Crochet hat for a girl: job description

Summer children's hat for girls! A wonderful decoration for a little princess!

We will need:

• yarn for a hat 169m/50g (consumption for the hat itself - 1 skein);
• hook No. 2.1 and No. 2.5.

We’ll take this pattern as a basis, but we’ll make our own adjustments during the knitting process. The hat will fit on an OG of 48-50 cm.

We will use abbreviations: v.p.- air loop; SS- connecting post; RLS- single crochet; CH- double crochet; S2H- double crochet stitch; С3Н- double crochet stitch.

Draw your attention: Each row starts with 4 ch. - 3 lifting loops and 1 ch. for the arch.

The hat pattern is knitted in the form of the so-called. "tick" - 2 dc, separated by 1 ch. into the arch of the previous row. The expansion of the bottom to the required diameter occurs by uniformly adding 6 “checkmarks” in each row. To ensure that the corners in the places of increases do not stand out sharply, the increases in each subsequent row are made offset by half a segment relative to the previous one.

So, let's start: 4 ch. - we close it in a ring.

1st row - 4 v.p. (3 lifting loops and 1 ch for the arch), 11 CH.

2nd row - in each arch of the previous row we knit 2 dcs, separated by 1 ch. It turns out 12 t.n. "tick".

3rd row - we begin to make “tick” increases. In each subsequent row there will be six such increases. The essence of this increase is to knit an additional “tick” between the arches of the previous row.

Row 4 - make 6 tick increments every 3 ticks of the previous row.

Row 5 - make 6 tick increments every 4 ticks of the previous row.

Row 6 - knit without increments. In each arch of the previous row we knit 2 dcs, separated by 1 ch.

Row 7 - make 6 tick increments every 5 ticks of the previous row.

Row 8 - knit without increments. The bottom begins to round out a little.

Row 9 - make 6 tick increments every 6 ticks of the previous row. This is where the increases end and we continue to knit the hats to the required depth without them. The bottom was 13 cm. I got 26 rows from the beginning of knitting and the height of the hat to the brim was 17 cm.

This is what the seam looks like.

For the fields we knit 2 rows of sc. In the second row we make increases in every 5th column. In the next row, in each top of the column of the previous row, we alternately knit 1 embossed column and 1 DC. That. crochet number 2.1 we knit three rows of fields. Now change the hook to No. 2.5 and knit 2 more rows. The photo shows that the brim becomes perpendicular to the hat itself from the first row of knitting. We knit the last row in crab step with crochet number 2.1.

Crochet a summer Panama hat for a girl

I present to you a master class on crocheting a Panama hat for a one-year-old girl from Larisa (Rozetka) from Krasnodar.

These panama hats stuck on me. First I knitted the white one - it’s a little smaller than the pink one (they asked me to knit it for a little girl - Verochka) Then I knitted a little bigger one for my Alyonka...
Head circumference - 44-45cm. Iris threads, you will need a little less than two skeins of 25g each. (one for the Panama hat itself and a little more than half a skein for the ruffles), hook No. 1.25.
So, we knit the bottom according to the pattern. It consists of 11 rows (The chain ring of 10 vp is the 0th row). 12th row - Dc (dc) in each loop of the previous row, there are no more additions here. We knit the DCs directly under the arches and only where they fall on the tops of the DCs of the previous row - we knit them at the top of these columns, i.e. into the loop itself.

The finished bottom looks like this and its diameter should be approximately 11-11.5 cm. In this case, the final size of the panama hat will be 44-45 cm. If your diameter is larger, the size of the panama hat will increase accordingly.


The 12th row - the DC row is already the first row of the side part of the Panama hat, where no additions are made. After it, we begin to knit the side part according to this pattern.


Immediately the Panama hat begins to curve down and take the desired shape.


We knit 13 rows with the main pattern for the side of the Panama hat, the 14th row - Dc, from the 15th to 17th row - the pattern for the sides, the 18th last row - Dc. This is what should happen as a result.
The depth of the resulting panama hat is 14 cm. The width is 22 cm. (if folded in half).


We tie the bottom edge of the panama hat.
1st row: 1 VP lifting * 3 SBN (single crochet) in three loops of the previous row, 5 VP (chain loops), skip 4 loops of the previous row *, repeat from * to *, finish the row SS (connecting stitch) and make another SS to advance to center sc of three.
2nd row: 1 VP lifting, * 8 SBN in the arch of 5 VP, 1 SBN in the central RLS from the three previous rows *, repeat from * to *.


Now let's get to the fun part - the ruffles. It was for them that we knitted several rows with continuous DCs, or rather three rows (one at the top, immediately after the bottom, and two at the bottom). Each ruffle consists of three rows.
The 1st row is RLS, which we tie on top of the row of SSNs in a zigzag. Each zigzag step consists of 4 sc.
In the lowest strip of ruffle, which goes above the binding of the bottom edge of the panama hat, it is important to place the zigzag in such a way that the wave of the ruffle passes under the arch, and not under three RLS - otherwise the scallops of the binding will bend inward.
In the remaining two stripes, the zigzag can be placed arbitrarily.
We knit the 2nd row of ruffles as follows. We start the row with 3 VP lifting, *1DC, skip 1 loop of the previous row, 1VP* repeat from *to*.


And finally, the 3rd, last row is a row of sc in each loop of the previous row (more precisely at the top of the sc, under the arch, etc.).


On the other two strips of the CCH we apply ruffles in the same way. This is what the panama hat should look like. Thanks to the ruffle trim, it holds its shape quite well... like a starched hat.


Source http://rosetka.blogspot.com/2009/07/master-klass-panamka.html

Crochet brim hat. Scheme

A hat crocheted using our own “Spring Mood” pattern.

Author of the work: Svetlana Vyacheslavovna Kotlyar, teacher at the Berezovsky kindergarten No. 33, Arzamas district, Nizhny Novgorod region.

The master class is designed for children of middle and high school age, teachers and parents who have basic crocheting skills.
Target: making headdress.
Purpose: This work can be a gift, used at exhibitions or simply serve as a headdress.
Tasks: development of fine motor skills of the hands, development of creative thinking.
You will need: red “Children's whim” yarn - 1 skein, some yellow yarn, hook number 1.5.
Good afternoon I offer to crochet a hat with me for you, your daughter or granddaughter. The hat is knitted quickly, the knitting technique is very simple. I will try to describe everything in detail in my master class, if you have any questions, write, I will be happy to answer. So, let's begin.
Diagram from rows 1 to 6 (for the designations in all diagrams, see the diagram of the flower base).

Description of work: cast on 6 air loops and close the chain into a ring. 1 row. We knit 16 double crochets in a circle.
2nd row. 2 chain stitches + 1 chain stitch, 1 double crochet + 1 chain stitch (alternate until the end of the row).

3rd row. 2 chain stitches, 1 double crochet + 1 chain crochet, 2 double crochets + 1 chain crochet.

4 row. 2 chain stitches, 1 double crochet + 2 chain crochets, 2 double crochets + 2 chain crochets.
5 row. 2 chain crochets, 2 double crochets + 2 chain crochets, 3 double crochets + 2 chain crochets.

Next we knit according to the following pattern. (hat diagram from rows 6 to 28).

Description of work: 6, 7, 8 row. 2 chain stitches, 3 double crochets + 2 chain crochets, 4 double crochets + 2 chain crochets.
Don’t forget that starting from the 7th row, shift the pattern to the left (if there are no additions of columns in the row)!

9, 10, 11 row. In each row we continue to add 1 double crochet, without changing the number of chain stitches.
The diameter of the bottom of the cap should be equal to the volume of the head: 3.14.
In our case it is 16 cm (head volume 50: 3.14 = 15.9 (cm)). If the volume of the head is smaller or larger, then the diameter of the bottom will be smaller or larger, count!

From the next row our hat will begin to bend.
12, 13 row. 2 chain stitches, 7 double crochets + 2 chain crochets, 8 double crochets + 2 chain crochets.
14 row. 2 chain stitches, 6 double crochets + 2 chain crochets, 7 double crochets + 2 chain crochets.

15 row. 2 chain stitches, 6 double crochets + 3 chain crochets, 7 double crochets + 3 chain crochets.

16-24 row. 2 chain stitches, 6 double crochets + 4 chain crochets, 7 double crochets + 4 chain crochets.

25, 26, 27 row. 2 double crochets, 6 double crochets + 5 double crochets, 7 double crochets + 5 double crochets.

28 row. Next, we begin to knit the brim for the hat, they are made with single crochets.

We continue to knit the fields, there are no additions of columns in the row.
For our fields, 9 rows were enough for us, if anyone wants a larger field, feel free to add rows!
Row 37 will be the last one. The hat is almost ready.

Let’s shape the cap (you don’t have to do this): dilute the gelatin in water (a tablespoon per glass of water), then pour it into boiling water while stirring.
Immerse the wet cap in the resulting solution, squeeze out, and shape.

We will need a yellow thread, let's start knitting a flower. Flower diagram.

We collect a chain of seven air loops and close the chain into a ring.
1 row. We knit 21 double crochets.

2nd row. 12 chain stitches, 2 single crochets (alternate until the end of the row).
It turns out to be a flower with 7 petals.

3rd row. We tie each petal like this: 1 single crochet, 2 double crochets, 6 double crochets, 2 double crochets, 1 single crochet. Single crochet between the petals.

The first tier of the flower is finished, let's start knitting the second.
In the second tier we will have five petals.
1 row of the second tier. Each petal consists of 7 air loops, connected to the ring of the 1st tier by a connecting post.

2nd row. We tie each petal like this: 1 single crochet, 5 double crochets, 1 single crochet.

The third tier will have three petals.
1 row. Each petal consists of 5 air loops, connected to the ring of the 1st tier by a connecting post.
2nd row. We tie each petal like this: 1 single crochet, 4 double crochets, 1 single crochet.

For the middle of the flower, we collect 4 air loops and connect them to the ring of the 1st tier.
We tie this petal like this: 1 single crochet, 3 double crochets, 1 single crochet.

Next we knit the base of the flower. We collect air loops and connect them into a ring. 1 row of base. 2 chain stitches + 19 double crochets.

2nd row. 2 chain stitches, 4 chain stitches + 1 double crochet + 4 chain stitches.
3, 4, 5 row. Next we knit according to the following pattern.

The base for the flower is ready.

Next, we connect the base with the flower, this is what we get.

You can leave the flower yellow; I tied the edges of the flower petals in single crochets with red thread, but did not tie the base.

Who would have thought that you could crochet a hat! Despite the apparent difficulty, even beginners can do this within one day. This is a traditionally feminine accessory, so our article will look at various ways of knitting hats for girls and little girls who do not want to lag behind fashion.

Photos of women's crocheted hats

Women's hats knitted by themselves look incredibly elegant. With such a headdress you will definitely not go unnoticed. Look at the photos of finished works from professional craftsmen, perhaps very soon you will become the owner of such an original and cute hat.

Children's options are no less beautiful. The hats of little fashionistas can be decorated in any way you like. Pineapples, violets, roses, daisies and berries are ideal.

Master class and description of crochet hats

As children, many girls were jealous of their dolls because they had such beautiful hats. Now you can make your dream come true and become the owner of an ultra-fashionable and modern headdress.

Our master class is dedicated to creating a small children's model with improvised brims and a satin ribbon as an additional decoration. Openwork knitting makes the product airy and soft - ideal for the summer season.

To begin, choose the appropriate thread color. You can take any patterns, but we suggest using ours if you do not yet have experience in knitting such products. Our description will help you figure it out if anything is unclear.

The amount of yarn depends on the size. But, considering that we are knitting a model for a girl, 100 g of cotton thread will be enough for you. To work, use hook number 2.

At the very beginning you need to knit a simple chain of air loops. Secure it in a circle. The next row consists of three lifting loops and 30 double crochets. Then you need to lift again, and then knit, alternating two chain stitches and one double crochet. The third row will already have 44 double crochets.

Now pay attention to the diagram. It shows how to knit further. Just follow the directions and you'll soon be able to enjoy the sight of a beautiful pattern. You should end up with a large dome with connected openwork petals. It needs to be carefully starched and the brims turned outward. Then you need to thread the satin ribbon through the lace and tie it with a beautiful bow. At this point the work is completed, and you can already show off your brand new hat in front of your girlfriends.

How to create a crochet hat with a large brim: diagram and video

The hat in the previous master class has very small brims. If you like a model with large edges, you will have to use a wire frame. The fact is that starch will not overcome the weight of the knitted pattern, and the brim can quickly drop, and the product itself will lose its appearance.

For knitting you will need white cotton yarn, at least 150 g. The work begins by making 6 air loops that are connected into a ring. Knit the next rows according to the pattern shown below.

Once the hat is ready, attach the wire frame to it, giving it the correct shape. It would be advisable to additionally starch the product and place it on the mold.

Another interesting lesson is offered in the video. You don't need a pattern to create this hat. Its author comes up with the patterns himself. Just listen to the recommendations and see how to knit a hat correctly. The beauty of the finished product can be enjoyed after a few hours of effortless work.

Photos of hats in retro style, with large brims and made of lace

A woman's hat can be made in any shape. Recently, retro-style products have been in particular demand. We offer several options for this type of hat.

In the summer, you need to protect your face from the sun more carefully. A beautiful hat with a large brim will help you with this. In it you will be like a real English lady at a reception with the Queen.