Amigurumi unicorn toy: how to knit a pink unicorn. The complete scheme is free!

Wonderful, magical, rainbow unicorns! Girls of all ages adore them so much, especially after cartoons :) For a long time I was looking for a unicorn knitting pattern, but I never found a clear description in Russian of the toy model that was interesting to me. There are paid schemes that are quite interesting. I didn’t want to buy it, so I took the English dragon as a basis (a strange option))). I’ve slightly altered the diagram, so if there are any discrepancies in it, please write to me and I’ll definitely correct it! So, let's start our favorite activity!

We will need:

• Cotton yarn or cotton/polyester pale pink and hot pink yarn 50g. 1 piece each
• Filling as available (I have synthetic fluff)
• Sew on eyes
• Hook No. 2
• Knitting needles No. 2
• Sew-on eyes 10mm
• Marker for displaying a row
• Sewing needle

Unicorn knitting pattern

Head

I use pale pink yarn. We knit with single crochets

1. 6 stitches in the magic circle, tighten the loop and place the marker

2. increase in each loop, 12p

3. 1st, increase in the second column, repeat, 18p

4. 2st stitch, increase in the 3rd stitch, 24p

5-8. no change 24p

9. 3 stitches, increase in the 4th stitch, 30p

10. 4st, increase in the 5th column, 36p

11. 5st, increase in the 6th column, 42p

12-16. We knit without changes, 42p

17. In every 6 loops - decrease, 36p

18. In every 5 loops - decrease, 30p

19. In every 4 loops - decrease, 24p

20. In every 3 loops - decrease, 18p

21. In every 2 loops - decrease, 12p

22. In each 1 loop - decrease, 6p

Our eyes are located between rows 11 and 12 and about 11 stitches from each other. Make sure they are exactly where you want them to look nice. Add filler as you knit, otherwise it will be more difficult to do at the end. Add the final filler, and join the last six stitches to close the head neatly.

Ears (two parts)

1. 5 stitches from the magic circle, tighten a loop and place a marker, 5 stitches

2. repeat, only 5 loops

3. 1st, increase in 2p, 7p

4. no changes. 7p

5. 1st, increase in 2p, 10p

6 – 7. no changes.

Pull the empty loop through to finish, leaving a long tail. Don't stuff your ears to flatten them.

Paws (hands)

We start with bright pink yarn.

3. No changes. We knit on both walls (12p)
4 and 5. Knit as is (12p)

Change the yarn to pink.
6-21. We knit without changes (18p)

Cut the thread, leaving a small tip. I tie the arms into the body, if you sew, you need to leave the thread longer.
Fill the unicorn's arms a little with synthetic fluff (or any other filler), but not too tightly.

Legs and torso

We start with bright pink yarn.

1. Cast on 6 loops (6p) into the amigurumi ring
2. Increase in each stitch (12 stitches)
3. In every 2 loops, increase (18 stitches)
4 -5. We knit without changes (18p). Change the thread to a pale pink shade.
6-12 We knit 12 loops without changes.

Fasten and cut the thread at the first leg. If you want the seam to look inward, then place the legs with the last loops of the row opposite each other.

We knit the second leg, but without cutting the thread, but continuing to knit the body.
Make sure the legs are installed correctly, sew additional seams or cut off unnecessary threads if necessary. Continue knitting the body, starting with the second leg.
While knitting, gradually fill the toy with filler. At the end of knitting, stuffing the toy will be extremely problematic.
We connect the legs through 2 air loops.
15. We knit 18 loops from one leg. Then 2 loops from the air connection loops, then another 18 loops of the second leg and 2 more connection loops. Here you can hang a marker, this will be the beginning of the row (42p)
16. We knit 42 sc without changes
17. 1 increase in 8 loops, then increase through 15 loops, another 8 loops and 1 increase (46p)
18. Knit without changes, 46 loops each
19. 1 increase in 8 loops, then increase through 15 loops, another 8 loops and 1 increase (50p)
19-25. without changes
26. 6 sc, decrease, repeat (44p)
27-28. in all we knit without changes (44 sts)
29. decrease, 5 sc, repeat (38 sts)
30. We knit in all without changes (38 sts)
31. 4 sc, decrease, repeat (32p) Start stuffing the legs and body and continue as you knit.
32. Decrease 1, 3 stitches, repeat (26 stitches)
33. without changes (26p), in this row we mark a place and at the same time we knit the hands and paws of our unicorn.
34. no changes (26p)
35. Decrease, 2 stitches, repeat (20 stitches)
36. * 3sc, decrease, from * repeat 4 times (16p)

37-38 unchanged. Fasten it, cut the thread and hide it. Fill the toy to the top with filler.

Mane and tail

We cast on about 50-60 loops on the knitting needles. We close them immediately with a crochet hook and make a spiral. You need about 15-17 of these spirals for the tail. About 20 per head. Focus on your taste. Or you can make it in the form of threads.

Assembling the toy

1. Sew on the eyes.
2. Sew on the ears. First we mark it with needles so that it is symmetrical and leaves room for the horn.
3. Sew on the horn. You need to wrap any beautiful thread (you can use floss) around the horn.
4. Outlining a smile (optional)
5. You can “powder” it by tinting your cheeks with pastels.
6. Sew on the head.
7. Sew on the mane and tail.
8. You can sew a skirt from organza or tulle.

Hooray! Our toy is ready! They say unicorns bring happiness, so let your amigurumi unicorn become a real talisman!

Unicorn is a fairy-tale, mythical character. Known in many cultures around the world, it appears only to selected and pure-hearted people. The beautiful white horse with a graceful twisted horn on its head is a favorite of both children and adults.

I can’t help but mention little Agnes from the cartoon “Despicable Me,” who dreamed of a unicorn - first a toy one, then a real one. And while I was knitting, I couldn’t get her phrase out of my head when I saw my new plush friend: “MY FLUFFY!”:)

• interesting selection for the site!!!
• An introductory article to amigurumi knitting. Basic techniques and simple toys.

Unicorns are knitted in all sizes and colors, crocheted and knitted. I decided to invent and knit an amigurumi unicorn - miniature and cute. The height of the finished unicorn is 6.5 cm (including the horn 8.5 cm), it is well suited for a keychain.

I designed my unicorn in a classic look - a white body and a delicate palette for the hooves and mane. However, the fairytale horse will look great in any other colors; you can experiment with a rainbow of colors :)

The figure of the horse is simple, it resembles a dog - the symbol of the year, and even a novice needlewoman can handle it. A unicorn is knitted quickly, in one or two evenings. The yarn consumption is very small; leftovers from skeins work well.

To create a toy you will need:

• Pekhorka yarn “Children's novelty” (100% high-volume acrylic, 200 m/50 g), I used the colors white, pink and iceberg;
• hook No. 1.4;
• padding polyester for filling;
• needle with a blunt end;
• eyes or beads (optional);
• bobbin or wool thread to decorate the face.

Crochet amigurumi unicorn, job description

Let's start with the head:
take pink yarn

2nd row: 6 increases (12)
3rd row: *1 sc inc* 6 times (18)
4th row: *2 sbn* 6 times (24)
Row 5: *3 sc inc* 6 times (30)
Rows 6-9: 30 sc in each row
change the yarn to white
Rows 10-12: 30 sc in each row
Row 13: *8 sc dec* 3 times (27)
Row 14: 27 sc
Row 15: *7 sbn* 3 times (24)
16th row: we knit 3 air loops (we skip 3 sc in the previous row), starting from the 4th sc of the previous row we knit 21 sc, a total of 24 sc in the row, the resulting hole will be the junction of the head with the body
Row 17: 24 sc
Row 18: *6 sbn* 3 times (21)
Row 19: *5 sc dec* 3 times (18) - fill the head with padding polyester
Row 20: *1 sc dec* 6 times (12)
Row 21: 6 decreases, close knitting.

Let's move on to the body. It originates from a hole in the head; the thread can be secured in one of the sides:

take white yarn
1st row: 6 increases (12)
2nd row: 12 sc
3rd row: *1 sc inc* 6 times (18)
4-5 rows: 18 sc in each row
6th row: *2 sbn* 6 times (24)
7th row: 24 sbn
Row 8: *7 sc inc* 3 times (27)
Rows 9-11: 27 sc
Row 12: *7 sc dec* 3 times (24)
Row 13: *2 sc dec* 6 times (18) - stuff the body with padding polyester
Row 14: *1 sc dec* 6 times (12)
Row 15: 6 decreases, close knitting

Let's knit small ears for the unicorn.

We take white yarn. We collect 3 air loops, then 1 sc in the second loop from the hook (middle loop), 3 sc in the outer loop, 1 sc in the middle loop, a total of 5 sc, cut the thread, leave the tip for sewing. We knit two ears.
We knit the legs. Take iceberg-colored yarn:
1st row: 6 sc in amigurumi ring
2nd row: 6 increases (12)
3rd row: 12 sc behind the back walls of the loops of the previous row
change the yarn to white
4-6 row: 12 sc in each row, cut the thread, leave the tip
We knit four legs. When sewing, I placed the top legs a little closer to each other than the bottom ones. We fill the padding polyester loosely.

Let's proceed to the most important detail of the unicorn - we will tie its horn.

You will need quite a bit of beige yarn:
1st row: 4 sc in amigurumi ring. To create the second row, you will need to turn the first row out a little
2nd row: 4 sc
3rd row: increase, 3 sc (5)
4th row: inc, 4 sc (6)
5th row: inc, 5 sc (7)
6th row: inc, 6 sc (8)
7th row: inc, 7 sc (9)

We fill the horn with padding polyester. We connect all the parts of the unicorn together and start decorating. For the mane and tail, I cut pink and mint yarn into 9 cm pieces. I secured the pieces by folding them in half and pulling them through the middle, and pulled the ends into the resulting loop. For the mane I made two threads in a bun, for the tail I used four threads of both shades. For the face, I used black spool thread and embroidered smiling eyes, nostrils and mouth for the horse.

For the eyes, you can use beads or blanks from the store.

Many fairy tales and universes cannot do without these creatures. Therefore, it would be a good idea to knit a unicorn among toys. The tutorials below will help you create this crochet pattern wonderfully, but it is worth remembering that these unicorn crochet options are provided as samples only.

The imagination of the craftswoman herself is absolutely unlimited! And the more unique the crocheted unicorns are, the more they will appeal not only to children and family, but also to your friends and acquaintances.

On the other hand, the presented master classes offer detailed step-by-step instructions, so they may still be suitable for beginners.

By following the diagram in detail, it will be possible to complete the job relatively easily and it will be almost impossible to make a mistake. So, if you are just starting to create crochet unicorns, it might be best to follow the instructions below.

As a rule, the head, ears, paws, legs, and torso are first knitted separately and then fastened together. You can sew/knit any clothes and decorate the figurine with it.

It’s enough just to look at the finished knitted unicorn toys to fall in love with how beautiful they look and have a desire to become the author of such a small masterpiece!

What to prepare

Depends on what kind of master class you choose or what your plans are for making a toy yourself. However, most often for crocheting a unicorn you will need:

• cotton (yarn or polyester);
• filler as available (optional synthetic fluff);
• hook;
• knitting needles;
• sew-on eyes;
• marker for displaying a row;
• needle for sewing.

And, of course, a little inspiration and desire, which is absolutely necessary in any creativity. It is when a person puts a piece of his soul into a toy that he, children, and good adults will really like it!

Crochet a unicorn, patterns from our website

Unicorn is a fairy-tale, mythical character. Known in many cultures around the world, it appears only to selected and pure-hearted people. The beautiful white horse with a graceful twisted horn on its head is a favorite of both children and adults. Not

Crochet mini unicorn

The master class was shared by @medvedevadolls For a unicorn measuring 4 cm, you will need: Pekhorka “colored lace” - white and pink; hook 0.5mm; a piece of wire, synthetic fluff, a needle, scissors, wool for felting. Description of the unicorn crochet Handles: 1. KA6 2. (sc, inc) ×3 (9) 3-4.

I knitted a unicorn according to the picture, and this is how I got this toy. Description of the toy: HEAD: 1) 6sc in a ring; 2)6pr(12); 3)(1sc, inc) 6 times (18); 4-5) 18sc; 6) 4sbn, (inc, 2sbn) 3 times, inc, 4sbn (22); 7) 4sbn, (inc, sbn) 7 times, 4sbn (29) ; 8) 2sc,

Author of the toy and description: Albina Latyshova @albina_toys. When using Himalaya Dolphin Baby yarn and a 3.0 mm hook, the size of the unicorn is 17-19 cm. You will also need some yellow semi-cotton yarn and a 2.0 mm hook for knitting a horn. Legend:

Author's description from @karabiber_toys Symbols KA - amigurumi ring sc - single crochet inc - increase (2 loops in 1) dec - decrease (2 loops together) (...)*n - repeat what is indicated in brackets n times (12) - quantity loops at the end of the row Scheme

Crochet unicorn, a selection of patterns from the Internet

Unicorn, horse and zebra crocheted according to the same pattern

For knitting you will need:

• Hook: 2- 2.5 mm
• Eyes: 7mm
• Required yarn colors:
• brown (for head, arms, legs, body, ears)
• white (for head, arms, legs),
• beige (for arms and legs),
• gray (for horseshoes),
• pink (for buckle).

List of necessary materials for a unicorn:

1. Main yarn YarnArt Dolce color 750 (pale pink) - 125 g (a little more than one skein);
2. Yarn for finishing the unicorn (hooves, a little on the head) Alize Cotton Gold color 616 (purple) - 15 g;
3. Yarn for unicorn wings Alize Softy color 55 (white) - 15 g;
4. Yarn for unicorn eyes Vita Coco color 3851 (white), 3852 (black), 4306 (brown) - 5 g each;
5. Yarn for horn Vita Coco color 3863 (yellow) + gold lurex - 5 g;
6. Yarn for nostrils and mane Vita Coco color 3888 (purple) - 10 g;
7. Pale pink plastic buttons with a diameter of 2.5 cm - 4 pcs;
8. Hollow fiber for stuffing a unicorn.

Tools (we select the hook numbers to suit your knitting, I use these):

1. Hook number 6 for main yarn;
2. Hook No. 3 for Alize Cotton Gold and Alize Softy;
3. Hook No. 1 for Soso;
4. Long needle for sewing on legs;
5. Needle (regular) + spool thread white, yellow, pale pink.

The height of the finished unicorn toy is 36 cm, when using yarn of the specified thickness.

Materials for knitting a unicorn:

• hook 2 or 2.5 mm
• soft filler (holofiber or silicone)
• scissors
• stitching needle
• 2 black eyes 6 mm
• 3 star buttons

Knitted unicorn toy from.

To create a unicorn you will need:

• Yarn in three colors - I used Alize Happy Baby for the body, and Alize Softy for the mane
• Filler
• Eyes 10 mm
• Stitching needle and scissors
• Buttons 6 mm for body decoration
• Button 10 mm for snood.
• Thin yarn for unicorn eyebrows.

Every girl dreams of her little unicorn pony. Create a fantasy world for your child filled with fairy-tale creatures. We suggest knitting a unicorn pony from the cartoon of the same name (“My Little Pony”). In your creativity, you can use the brightest colors and their unusual combinations, come up with a hairstyle for a knitted unicorn and accessories. Each pony has its own symbol on its barrel, showing its special magical talents or purpose in life.

The unicorn toy is easy to make and will be a good little gift for girls, young women and middle-aged girls.
I offer 2 design options. The first one you see in the photographs, the second one is safe and intended for small children.

To knit a unicorn you will need:

• Yarn in light colors, preferably white.
• A little pink (or beige for the hooves) is optional.
• If you have it, a little silver or gold yarn for the horn.
• The hook is suitable for knitting with selected threads.
• Leftover scraps for the mane or yarn of any color if the gift is for a small child.
• Unicorn Stuffer
• Unicorn stitching needle
• 2 beads for eyes or black yarn (embroidered eyes).

Crochet pattern for a baby unicorn

For knitting you will need:

• main yarn YarnArt Jeans;
• additional yarn (the author has acrylic);
• hook No. 2;
• scissors;
• needle for stitching parts;
• filler (sintepon);
• beads for eyes.

To create the unicorn I used the following materials:

1. Yarn Gazzal baby cotton (60% cotton, 40% acrylic, 50g, 165m) half a skein of the main color and not many additional colors.
2. Yarn Alize Bella (100% cotton 50g, 180m) in two colors, for a dress
3. Hook for your yarn. I have No. 1.75 for main and No. 2 for clothing.
4. Cotter pins: T-cotter pin - 4 pcs., O-cotter pin - 2 pcs.; wheels: 15mm - 4 pcs. for handles, 18mm - 4 pcs. for legs, 22mm - 2 pcs. for head mounting; washers - 10 pcs.
5. Filling (synthetic down, holofiber or swan down).
6. Screw eyes with a diameter of 10mm.
7. Strong thread for drawstrings, needle, safety pins, scissors.
8. Round nose pliers.
9. Glue Moment Crystal.
10. Dry pastel for tinting or any other tinting medium you are used to (optional).
11. Embroidery floss.
12. A button for a dress, a satin ribbon (0.6 mm wide) or any other decorations for the dress and for the unicorn itself.

Basic materials for the toy:

• plush yarn (I used "Himalaya" "Dolphin Baby") a little more than a skein of the main color, and a little additional color: dark brown for the legs, white or milky for the wings. Choose any colors you like best.
• yarn “Vita” “Coco” or analogues - for sewing on ears, wings and knitting
  horns and peephole;
• hook No. 4mm.

Video - lessons on crochet unicorns and unicorns

Crochet Plush Unicorn

Unicorns are one of the most popular and favorite toys for children! In this video master class we will crochet a Unicorn plush toy. For knitting you will need plush yarn. I use Himalaya Dolphin Baby plush yarn and a size 4 crochet hook.

Unicorn amigurumi crochet

Let's knit a new friend - Unicorn Bulya! Materials: yarn Children's novelty Pekhorka (50 g/200 m) 01-white, 73-iceberg, 519-blue, 12-yolk, 324-st. azalea. Hook: 2 mm. Screw eyes, felt, buttons (4 pcs). Floss threads. Filling: padding polyester.

The video should load here, please wait or refresh the page.

Master class on crocheting a unicorn, part 1

When using the materials specified in the MK, the toy is approximately 16 cm high + ears and horn.

Materials for knitting a unicorn:

• body yarn - Yarnart Jeans (55% cotton, 45% polyacrylic, 50 g = 160m);
• yarn for the tail and mane - thin cotton “Yaroslav” (100% cotton, 50g = 350m);
• holofiber filler;
• eyes on a safe mount with a diameter of 6mm;
• eyelashes for toys.

The video should load here, please wait or refresh the page.

Master class on crocheting a unicorn, part 2

The video should load here, please wait or refresh the page.

Do you want to crochet an amigurumi toy, but don’t know where to start? The unicorn knitting pattern was created by Alison North specifically for beginner, inexperienced knitters.

It describes basic crochet techniques, those that are most often used for crocheted amigurumi toys. The diagram is accompanied by step-by-step photographs, so novice amigurumers can easily cope with the task. Also in the description of the toy you will find valuable design tips and other little tricks.

The translation of the knitted unicorn pattern into Russian was carried out by the Handcraft Studio team at the request of our readers. We are waiting for your wishes regarding new translations of knitted toys! Good luck to everyone!

Unicorn amigurumi for beginners
with a detailed description of knitting elements and techniques

Translation of the diagram into Russian was prepared by Handcraft Studio.

You will need:

• crochet hook 3 mm
• 70 g worsted yarn in white or cream color
• a small amount of contrasting yarn (20 g) for hooves
• a small amount of fluffy yarn for hair and scarf
• 9 mm eyes
• chalk (for blush on the cheeks)
• black thread for eyelash embroidery
• tapestry needle
• scissors
• material for filling toys
• crochet hook 10 mm (scarf only)

Abbreviations:

• RLS - single crochet
• СС – connecting post
• VP - air loop
• invisible decrease - invisible decrease of loops (2 single crochets, knitted together behind the front walls of the loops)
• increase - adding loops (we knit 2 single crochets into one base loop)

Connecting post
Insert the hook into the loop, yarn over and pull the thread through all the loops.

Single crochet
Insert the hook into the loop, grab the thread and pull it through this loop (two loops have formed on the hook), yarn over, pull the thread through both loops.

Decrease loops
Insert the hook into the loop, grab the thread and pull it through this loop (there are two loops on the hook), insert the hook into the next loop and pull the thread through this loop (there are 3 loops on the hook), yarn over and pull the thread through all three loops.

Invisible decrease of loops (2 single crochets, knitted together)
Please note that when performing stealth decreases you should only work the front edges of your stitches.
Insert the hook under the front wall of the first loop. Do not yarn over or catch the thread as you would with a normal decrease. Insert the hook under the front wall of the next loop. To do this you will have to tilt the hook down. Then bring your hook up, passing the second loop through the front wall. This creates three loops on the hook. Grab the yarn and pull it through the first 2 loops on the hook, making two loops. Grab the yarn again and pull it through the remaining two loops on the hook.

Color change
Insert the hook into the loop, grab the thread and pull it through this loop (two loops have formed on the hook). Drop a thread of that color, yarn over with another thread, and pull it through the two loops on your hook. Continue knitting with a new color thread. When working on multi-colored stripes, do not disconnect the threads; when necessary, simply pick up the thrown thread and continue knitting.

Magic ring
Fold the thread into a ring, leaving a small tail. Insert the hook into the center of the ring, yarn over and form a loop. Next, yarn over and bring the yarn through to make the first loop (don't count it as the first single crochet). Continue knitting in the same way until you have cast on enough stitches for the first row. For example, if the pattern requires 6 single crochets, repeat this procedure 6 times (insert hook into ring, catch yarn and make a loop, yarn over and pull yarn through two loops). When finished, pull the tail to close the ring.
Always move the knitting marker higher at the end of each row to make it easier to work on subsequent rows.
The number of stitches in a row is indicated at the end of the row in parentheses.

Amigurumi unicorn crochet pattern

Head
Take prepared white or cream thread and a 3 mm hook.

2nd row. [increase], repeat (12)

4 row. , repeat (24)
5-8 row. Sc in each loop (24)
9 row. , repeat (30)
10 row. , repeat (36)
11 row. 15 RLS, 6 times increase, 15 RLS (42)
12-16 row. Sc in each loop (42)
Place the eyes between rows 11 and 12 about 11 stitches apart, making sure they are exactly where you want them before joining as you will no longer be able to adjust their position. Now stuff the head until it is firm, you can add more material as we will be decreasing the number of stitches to cover the head next.
17th row. , repeat (36)
18th row. , repeat (30)
19 row. , repeat (24)
20 row. , repeat (18)
21 row. , repeat (12)
22 row. invisible decrease, repeat (6)
Pass yarn through all remaining 6 stitches to complete head.


Ears (2 parts)
1 row. 5 sc in magic ring, tighten and place marker (5)
2nd row. [Sc in each stitch] (5)
3rd row. , repeat, complete 1 sc in last stitch (7)
4 row. [Sc in each stitch] (7)
5 row. , repeat, complete 1 sc in last stitch (10)
6-7 row. [Sc in each stitch], repeat
Finish with a connecting post, leaving a long thread. Don't stuff your ears, just spread them out.

Horn
1 row. 4 sc in the magic ring, tighten (you can wait and not place the marker until the beginning of the 3rd row, since before then the knitting will be quite tight)
2nd row. Sc in each loop (4)
3rd row. , repeat (6)
4 row. Sc in each loop (6)
5 row. , repeat (9)
6-7 row. Sc in each loop (9)
8 row. , repeat, complete 1 sc in last stitch (13)
9-10 row. Sc in each loop (13)
Finish with a connecting post, leaving a long thread. Stuff the horn, help yourself with the point of the hook to stuff the horn right to the top. Pin the ears approximately where you want them to be. About 4 rows above the eyes and sew them on. Attach the horn to the middle of your knitted unicorn's head and sew.


Now you need to wrap the horn, take a long thread of a contrasting color about 30 inches long (about 75 cm). Insert the needle into the upper part of the head, 4 rows away from the horn, and bring it out at the level of the 1st row of the horn, as in the first picture. Leave a long tail outside and press it with your finger, now wrap the thread tightly around the horn, it should look like rows of stitches (picture 2).
When you get to the top (now a little trick), hold the thread wrapped tightly around the horn, insert the needle into the very top of the horn (medium sized stitches may be too tight, but the ones in the picture are just right), pass it through the horn and pull it out there, where the tail of the thread remains. Make sure that the thread is still tightly wrapped around the horn, make a double knot, hide it inside and cut the thread.


To do hair for unicorn , take your fluffy colored thread, wrap it around your palm 15 or 20 times (depending on how much hair you want), take scissors and cut the threads along the bottom fold (picture 1). Take a strand and bend it in half, pass the resulting loop through the loop on the unicorn's head, near the base of the horn. Next, take the ends and pass them through a loop of fluffy thread to make a knot and secure it to your head. Continue in this manner, pinning the hair on the head and a little at the back to create a small mane. Once all the strands are tied, trim them a little to tidy them up. Now you can add eyelashes using black thread, cotton or other suitable for embroidery, as in picture 4. Make a knot and hide the ends inside.


Legs (2 parts)
Start with a contrasting color. Do not immediately secure the other leg.
1 row. 6 sc in magic ring, tighten and place marker (6)

3rd row. , repeat (18)
4-5 row. Sc in each loop (18)
Return to the main color.
6-12 row. Sc in each loop (18)
Connecting post to finish knitting only on the first leg.
On the second leg.
13 row. 3 ch, connect with the other leg with a single crochet and knit 1 sc in each loop in the circle of both legs, sc in each of the three ch. The row will be completed when you complete the other side of 3 ch (42).
Position the marker. Now we will knit the body of the unicorn.
14-30 row. Sc in each loop (42)
31 row. , repeat (36)
32-33 row. Sc in each loop (36)
34 row. , repeat (30)
Row 35-36. Sc in each loop (30)
Stuff the body until it is firm, you may want to add more cotton wool as this is followed by decreasing stitches to complete the piece.
37 row. , repeat (24)
Row 38-39. Sc in each loop (24)
40 row. , repeat (18)
41-43 row. Sc in each loop (18)
Finish with a connecting post, leaving a long thread. Finish stuffing the body and sew the head to it.


Hands (2 parts)
1 row. 6 sc in magic ring, tighten and place marker (6)
2nd row. Increase, repeat (12)
Next comes one row where you use only the back wall of the loop.
3rd row. Sc in each loop (12)
Next, use both walls of the loops again
4-5 row. Sc in each loop (12)
6th row. , repeat (8)
Change the color
7-21 row. Sc in each loop (8)

Finish with a connecting post, leaving a long thread. Stuff your hands only in the hoof area. Sew the arms to the sides of the body. Make the tail for the unicorn the same way you did the hair, only make the strands longer and use 2 strands together to make the tail thicker. You will need to make 2 or 3 ties, and do them very close to each other.


To make it simple loop scarf , use a large 10 or 12 mm hook, use fluffy thread, cast on 25 loops, pull each end tightly and cut off the ends. Fold the scarf in half, wrap it around the unicorn's neck and thread the ends through the loop.


To do blush, take a pink or red crayon and draw them on your cheeks. Your amigurumi toy is ready! All that remains is to solemnly hand it over to its future owner!

Unicorns are fairy-tale creatures that are very popular among children and adults, because at any age you want to believe in miracles and the fulfillment of desires. Therefore, we have prepared five master classes on crocheting these cute creatures. One toy is a small chubby unicorn, the second is more like a real one, only with wings and a horn. Description of how to tie amigurumi toys, as well as a keychain, applique and handbag, and photos of the process from our craftswoman Anna.

Rainbow unicorn

In this MK we will knit a cute rainbow unicorn with curls. You can knit such a toy from any children's yarn. You can also use YarnArt Jeans.

To knit a unicorn we will need:

• Yarn of several colors;
• Hook;
• Sintepon;
• Artificial eyes;
• Needle.

Designations in the description:

• VP - air loop
• RLS - single crochet

We start knitting with white yarn. Knitting the head.

5-6r: no increases.

8p: no decreases.

9p: knit 2 sc. Then we knit 2 sc into the loop.

10r: knit 3 sc. In the next loop we will knit 2 sc.

13-16r: no increases.

17r: 4 RLS. Then we knit 2 sc together.

19r: 2 RLS. We knit the next 2 sc together.

20r: 1 RLS and the next 2 RLS together.

21r: knit 2 sc together until the end of the row.

Knitting the body white yarn.

1p: perform 2 VP. Then we knit 6 sc. We knit them into the 2nd loop from the hook.

2p: We knit 2 sc into a loop.

5p: we knit 3 sc and in the next loop we make 2 sc.

6p: 4 sc and in the next loop we knit 2 sc.

8-12r: no increments in a circle.

13r: 5 RLS, knit a decrease (2 RLS together).

14r: no decreases.

15r: 4 RLS, then perform a decrease.

16r: no decreases.

17r: 3 RLS, decrease.

18-20r: no reductions.

21r: 2 sc and then knit a decrease.

22r: no decreases. We stuff it with padding polyester.

23r: 1 RLS, decrease.

24r: no reductions.

Knitting ears white yarn.

1p: 2 VP. We knit 6 sc into the 2nd loop from the hook.

3p: 1 RLS. Then we perform 2 sc in the loop. So we will alternate until the end of the row and get 9 RLS.

5p: 2 sc, increase (2 sc in loop).

We knit a horn with pink yarn.

1p: 2 VP. From the hook into the far loop we knit 6 sc.

2-3r: 6 RLS.

4p: 1 RLS, increase.

5-8r: 9 RLS.

Knitting handles

2p: 2 sc in the loop.

3p: 1 RLS and increase.

4-5r: no increases.

6p: 1 RLS, decrease.

7p: change the yarn to light pink.

8p: in a circle without increases and without decreases.

9-18r: change the yarn to white and knit in the round. We fill the bottom of the handles with padding polyester.

Knitting legs. We start with bright pink yarn.

2p: 2 sc in the loop.

3p: 1 RLS and increase.

4p: 2 RLS and increase.

5-6r: in a circle without changes.

7p: 2 RLS, decrease.

8p: change the yarn to light pink. We knit in a circle RLS.

9p: decrease in every 5th stitch of the row.

10-17r: knit with white yarn in the round.

We sew all the parts into place.

And now we will knit multi-colored spirals. It will be mane and tail.

We cast on 28 VP and knit 2 sc in each loop. This is how a curl is formed.

5-6 spirals are enough for the mane.

We will also contact a star to decorate the tummy.

We make a sliding loop. And we perform 5 VP. Next we knit 1 sl, 1 sc, 1 hdc, 1 dc. And in a sliding loop 1 RLS. Repeat 4 more times and tighten the loop.

Sew on the mane and tail.

Sew a star onto the side of the tummy. You can make a nose by adding nostrils. We simply attach white yarn and knit 1 puffy stitch on one side of the muzzle and on the other.

Our cute unicorn is ready!

This video shows how to properly attach the tail and mane:

And an option for attaching the limbs so that they are movable, using buttons:

Another video from YouTube on how to knit a plush unicorn:

Unicorn with wings

Romantic unicorn-horse with wings.

To knit a unicorn you need:

• Yarn Art Jeans thread in beige, blue, orange;
• Hook;
• Sintepon;
• 2 peepholes;
• Scissors;
• Needle.

Head

1 r: make a sliding loop. Let's do 6 single crochets.

2 p: we will make an increase in each loop.

3 p: we continue adding, but now we knit 2 stitches not in each loop, but in every 2nd loop, that is, after 1. At the end of the row, we count the loops and get 18.

4 p: no need to add, just knit 1 stitch in each loop.

5 r: we knit increases in every 3rd loop of the row. As a result, we get 24 columns.

6-10 r: knit without increases. We simply make 5 rows of 24 stitches.

11 r: but in the new row we will make an increase in every 4th loop, that is, every 3 loops along the entire row. At the end there will be 30 columns.

12 r: we knit a row without making any additions.

13 r: add again after 2 loops to further highlight the transition from the muzzle to the head.

14-15 rubles: we do not add.

Don’t forget that as you knit, you need to fill the piece with padding polyester.

16 r: we knit 3 stitches, 1 per loop, and then knit 4 and 5 loops together with one stitch. And so we do the whole row.

17 r: decrease after 2 loops.

18 r: decrease through 1 loop.

19 r: in the end we will knit 2 loops along the entire row. We tighten the remaining hole with thread.

Let's put the detail aside. Let's start knitting body. Let's start with the neck.

1 r: make a sliding loop and knit 6 single crochets inside.

2 p: add to each loop.

3 r: we knit 12 single crochets behind the back wall of the loops.

4-9 r: knit 1 stitch in each loop.

10 r: increases through 2 loops.

11 r: knit without increases.

12 r: let's move on to knitting the back. We knit exactly half the row. Next we knit 11 loops. Let's knit down the chain. In the 2nd loop we knit 2 single crochets. Next we knit 1 column into a loop of the chain. We reach the main part and knit the row to the end.

13 r: it is better to mark the beginning of the row with a thread of a contrasting color or a marker. Now we will knit 2 stitches into the first loop of the row. Next, we knit 1 stitch each, knitting up to 3 loops on the back curve. In these 3 loops we will knit 2 single crochets. We complete the row without increments.

14 r: again we knit 2 stitches into the first loop of the row, and then we tie it until it curves on the back. Now there are 6 loops on the rounding, since in the last row we knitted 2 stitches in 3 loops. Now we will knit 2 stitches into these 6 loops, and 1 stitch into all the others.

15 r: there will now be 12 loops on the rounding. Now we will knit in all loops, including the very first loop, 1 single crochet, and in 12 loops on the rounding we will knit with an increase through 1 loop. We tie the row.

16 r: we will knit 1 single crochet, and in the rounding loops, there are now 18 of them, we will knit with an increase through 2 loops with half double crochets with 1 crochet. And we finish the row with single crochets.

We will simply knit the next 6 rows in the round using single crochets without any additions.

We begin to form the front legs. To do this, you need the hook to be in the center of the unicorn's chest. Therefore, let’s unravel several loops to fit exactly into the central loop. Then mark the first loop of the row and knit 14 single crochets. Next, we perform 1 stitch in the very first loop of the row. From the first loop we count 15 loops in the other direction and knit 1 single crochet into the 15th loop.

Now let's tie 1 leg.

1-6 r: we perform 14 single crochets in a circle.

7 r: decrease through 1 loop.

8-12 r: knit 1 stitch into a loop. Change the thread to blue.

13 r: we do not add.

14 r: knit with a decrease in each loop. We tighten the hole.

So we will knit the 2nd leg. We will also tie the hind legs. We attach the thread in the center, but now from the back and knit 14 stitches, then 1 stitch in the very first loop of the row, count 14 loops in the other direction and knit 1 stitch. We perform the legs themselves in the same way as the front ones.

We stuff the belly thoroughly with padding polyester and sew it together.

Let's tie it up horn, so we take orange yarn. We perform 6 single crochets in a sliding loop. We knit 2 rows of 6 single crochets. Next we add through the loop. We knit 2 rows of 9 single crochets.

Let's tie it up wing, so we take a thread of the main color. Make a slip loop again and knit 6 single crochets inside.

1 p: ​​complete 6 columns.

2 p: add through the loop.

3 p: knit a row without increases.

4 r: add again, but only now add through 2 loops.

5 rubles: no increase.

We knit this way, alternating a row with increases and a row without increases. We knit this way until we knit a row with additions through 5 loops. Next we knit 2 rows. And then we perform 3 loops, in the next loop we knit 2 double crochets. Next, 3 loops and 1 connecting post into a new loop. Next we connect 2 columns and repeat the element. This is how we complete the entire row. You need to connect 2 such parts.

Let's tie the mane. Mane and tail will be knitted according to the same pattern. For the mane we cast on 50 loops.

1 r: knit in a chain with an increase through a loop using single crochets.

2 r: knit with half double crochets with additions through 2 loops.

And for the tail we cast on not 50, but 30 loops for the initial chain.

For the mane, you can knit 2 identical parts. This will make it thicker and fluffier.

Ears are very easy to knit. We knit 6 stitches into a ring, then add them to each loop. Let's knit 2 such details.

We attach all the parts in place, and also attach the eyes.

Crochet unicorn is ready!

Interesting long-legged unicorn:

Keychain

Unicorns are especially popular with girls. And that’s why in this master class we will crochet a keychain in the shape of a unicorn. This keychain can be used to decorate a school backpack. It is better to knit a unicorn in soft colors, and make the tail and mane bright.

To knit a unicorn keychain we will need:

• Yarn "Children's bulk";
• Hook;
• Sintepon;
• Needle;
• Artificial eyes;
• Beads.

The unicorn will be white. You can also use milky or any pastel colored yarn. We start by knitting the body. We collect 2 VP. Next we knit 6 sc into the loop.

Now you need to make increments. We knit in rows.

1st row: increase in all 6 stitches of the previous row.

2p.: in this row we will increase through 1 loop to the end.

3rd row: we knit increases every 2 stitches. That is, in the 3rd.

Rows 4-6: we knit 24 sc in each of these rows.

Let's move on to decreases. And when knitting decreasing rows, we fill the body of the unicorn with padding polyester.

7th row: decrease every 2 stitches in the row.

8-10 rubles: we knit 18 sc in each of these 3 rows.

11r.: We knit decreases through a loop along the entire row.

RUR 12-13: 12 RLS in each row.

We knit the head with white yarn.

First we make 2 VPs and knit 6 sc into a loop. And then we will knit in rows again.

1st row: we increase in all loops of this row.

2p.: in this row we will knit the increase through the loop, in the 2nd.

3rd row: we knit increases through 2 loops, in the 3rd to the end.

Rows 4-5: 24 sc in each row.

6p: decrease every 2 stitches.

7-10 rubles: 18 sc in each row.

11r.: decrease through the loop.

12p.: decrease in each loop of the row.

You can attach unicorn eyes to the head.

We knit ears. To do this, we make 5 VP and then along the resulting chain we knit 1 sc, 2 hdc and 1 sc.

It is better to knit the horn with soft peach-colored yarn. We cast on 2 VP and knit 6 sc in a loop. We knit the next row without increases. And then we make an increase through the loop to the end of the row. And we knit 1 more row without increases.

For the mane we will tie 3 spirals and for the tail too: 2 blue, 2 purple and 2 orange.

We cast on 12 VPs and knit 1 row of sc, knitting 2 stitches per loop.

The paws will consist of VP. We collect 8 VP for each paw. In this case, you need to leave a long tail of thread from the first loop so that you can then sew on the foot. We put a bead on the bottom and make a large knot.

We sew everything in place. You can embroider eyelashes on a unicorn. All that remains is to attach the white yarn to the head from above and cast on 20-25 VPs and join the head again with a connecting column. Let's make a strong knot and hide the ends of the threads inside the knitting.

The unicorn keychain is ready!

And a cute brooch:

Application

This master class will show you in detail how to quickly and easily crochet a beautiful unicorn applique. This decorative element is perfect for decorating children's clothes or bags.

For knitting you will need:

• "Children's novelty" thread for the head and horn;
• Areola thread for the mane;
• Hook 1, 75mm;
• Scissors.

Abbreviations in the text:

• Ss1n – double crochet;
• Ss2n – double crochet stitch;
• Sc – single crochet;
• Pss1n – half double crochet.

First we will tie the muzzle. To do this, we cast on 10 air loops with white yarn. The tenth loop can be marked with a marker, because it is in it that we will knit the first element.

Then we will knit 4 more loops instead of 1 dc2n. Next, in the 5th loop from the hook we knit 1 dc2n. This is a loop with a marker. Next, we also knit 1 dc2n into 4 new loops of the chain.

You need to knit tightly so that there are no gaps.

Then in the next 2 loops we knit 1 dc. In the new loop 1 pss1n. And in the last loop we make 5 sc, so we rounded the nose a little. Then we knit 1 sl into the loop on the other side of the chain. We tighten the thread and cut it. We hide the tail of the thread with a hook on the wrong side of the part in the legs of the columns.

Now let's tie the neck. To do this, turn the resulting part over. We will attach the thread to the very first s2n, instead of it we knitted 4 loops. Next we knit 4 sc in loops.

We turn around and, without making air loops, knit an increase. Then 1 sc to the outer loop. We'll add it to it too. Then we knit a row without increases. And in the 1st row we will add from the sides.

We embroider the eye with black thread. It is enough to make a couple of stitches next to each other.

Attach the horn to the head.

Now you will need threads of three colors. It is better to choose more delicate shades. We cut them and tie them into a bun. For the mane, it is better to use a thinner thread than when knitting the unicorn itself, so in this case “Areola” yarn was used. The threads must be straight.

Now you need to sew this bun on the back of the unicorn’s head. You can use hot glue and simply glue the part.

We throw the resulting mane forward and carefully lay it out.

The unicorn applique is ready. It can be used as part of a more complex applique, or as a decoration for clothing.

Handbag

Unicorns are very popular among children. They love to decorate their backpacks and clothes with keychains and appliqués in the form of these mythical animals. In this master class we will crochet a handbag in the shape of a unicorn for a girl.

To knit a handbag you will need:

• Yarn “Children's novelty”;
• Hook;
• Scissors;
• Needle.

We start knitting a handbag from the bottom. We need to knit a circle of the required diameter. It depends on the desired size.

Make a sliding loop and cast on 3 loops at once. Next, we will knit 11 dc inside the sliding loop. Together with 3 loops, we will assume that 12 dc are connected.

In further rows we will knit increments until the bottom reaches the desired size.

We will first make increases in each of the loops. So we will increase the number of loops by 2 times, that is, there will be 24 of them. At the end we will knit 1 ss to close the row.

We will also start the next row with 3 loops instead of a stitch. And then we knit a row, adding through 1 loop.

In the new row we will continue to increase the bottom, knitting increases. We knit with an increase through 2 loops. Therefore, we will further add through 3 loops, and then through 4 loops. And we will knit 1 more row. This time we add through 5 loops.

Now you need to knit the height of the handbag. To do this, you just need to knit the required number of rows without adding. In this case, 10 rows are knitted after the last increment row.

The base for the bag was knitted. Now let's move on to knitting the strap. We collect air loops. Their number also depends on the desired length. And then we make 3 more loops and knit 1 dc in each loop of the chain, starting with 4 loops.

Now we need 5 skeins of yarn of different colors. We will knit flowers. They are all knitted according to the same pattern. Cast on 30 loops and knit 2 dc in each loop. Then we twist the workpiece into a flower and stitch it so that it does not fall apart.

We sew these flowers along the edge of the bag sequentially.

We knit ears. We start with white thread. Make a loop and knit 3 sc inside. We tighten the loop. We turn around and knit with increases in the first and last loops. We turn around in the new row, but don’t add any more.

Then we add again in 2 rows in a row. Then we knit without any increases. And then we will decrease in the first and last loops.

We knit 3 rows without decreasing. Then we turn it down. And 1 more row without decreases.

We do not cut the thread, but tie the sc along the contour. At the top, where the corner is, we knit 3 sc.

Now we will tie the inside of the ear with peach thread. We start with a sliding loop and 3 sc inside. U-turn. We knit 4 rows, adding to the first and last loops. We make the strapping.

Sew on the inside of the ear.

Now we will tie the horn with peach thread. We collect 6 sc in a sliding loop, then add through the loop. Next row without increase. We add the loan through 2 loops. And again we do not add a row. Then increase through 3 loops, row without increase. Increase in 4, row without increase, increase in 5 stitches, row without increase. And knit a row with an increase through 6 loops.

Fill the resulting cone with padding polyester. Now you need to sew on all the flowers, ears and horn.

All that remains is to embroider the eyes with black thread.

The unicorn handbag is ready!